• EEVblog #431 – PCB Wave Soldering


    Extended commentary on PCB surface mount wave soldering on the Fluke 91 Scopemeter.
    Original video here: http://youtu.be/AozG9DfGVeQ

    Be Sociable, Share!

      About EEVblog

      Check Also

      EEVblog #845 – Oscilloscope FFT Comparison

      EEVblog #845 – Oscilloscope FFT Comparison

      Dave compares the FFT modes on 7 different oscilloscopes: Rohde & Schwarz HMO1202 Series Tektronix ...

      • Worf

        Of course, the downside to reflow soldering is you can’t do through-hole parts at the same time… and leading to through-hole parts having to be manually soldered.

        if you look carefully at the teardown, you’ll see all the through-hole parts are on the top, the surface mount on the bottom, so just passing the bottom through the wave soldering machine will solder both types of parts in a single pass.

        • f4eru

          you can solder through hole components with reflow. For example with the Pin in Paste process

      EEVblogLogo