Author Topic: Altium Designer 19  (Read 2975 times)

0 Members and 1 Guest are viewing this topic.

Offline olkipukki

  • Regular Contributor
  • *
  • Posts: 107
  • Country: 00
Altium Designer 19
« on: November 30, 2018, 08:27:10 pm »
Somebody has opportunity to start AltiumDesigner 19 Beta testing? 

Also, there is a new product - Altium NEXUS, for "Agile PCB Design"  :palm:
 

Offline cjurczak

  • Contributor
  • Posts: 22
  • Country: us
Re: Altium Designer 19
« Reply #1 on: December 01, 2018, 07:22:04 am »
I just loaded it up for the first time today since I am in between projects.  I imported my settings, and have been poking around a bit with an existing design.  I'm having trouble getting the clearnace boundaries to display.  I had one crash so far, but I'm writing that off for now because it occured while running AD18 and 19 at the same time. 

I need to find a way to possibly import large number of laminate/pre-preg into the new material library, but I haven't really tried to hard. 
 

Offline olkipukki

  • Regular Contributor
  • *
  • Posts: 107
  • Country: 00
Re: Altium Designer 19
« Reply #2 on: December 22, 2018, 04:39:48 am »
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 7018
  • Country: us
    • SiliconValleyGarage
Re: Altium Designer 19
« Reply #3 on: January 07, 2019, 04:45:25 am »
been using it for a while now. ( both beta and released ) works fine. note : i do run the nexus version as i have a vault.
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline littleboot

  • Contributor
  • Posts: 11
  • Country: us
Re: Altium Designer 19
« Reply #4 on: January 12, 2019, 05:45:17 am »
Worst version yet, AD19.0.10 paying customers are beta testers and the support team (in the netherlands) is useless.

Can't wait for Altium360 because adding features is more important than fixing bugs!.
I had High hopes for AD19 because AD18 had some serious bugs and a very unpleasant GUI just put everything under properties tab it makes the gui look clean but very counter productive. I understand a lot had to be changed going from 32bit(AD17) to 64bit(AD18) but there are so many bugs why is AD19 out of beta???. I placed 6 components in AD19 today but I first had to find the library panel, I not only found the library now named "Components" but I also discovered at least 2 bugs. I can't put in words how frustrating this new update is, because it's not the first time a version got released not even ready for basic work.
We pay good money for the software tool and I feel like a beta tester. Reporting bugs is very time consuming and we get no feedback what so ever.
Did anybody else tried calling the dutch Altium support team? they know little to nothing most solution involve resetting the preferences to default. We stopped calling all together now it is of no use. We pay for the support get none and have to explain solutions to the support team.

AD19, lets rename Library to Components why?.
They fucked up library refresh (not working just close and reopen altium is a fix).

Done with this **** beta software please notify me when AD19 is out of beta and usable for work, for now I go back to AD17 to do my work.

Edit:
I was clearly frustrated when I wrote this message. I will use AD19 when a bug stops me I will report the bug(I hope they add a function from within Altium to do this) If the bug stops me finishing the work I will go back to AD17 to finish the work. Reporting bugs clearly is the only way the tool will get better, for now because no automated testing is done to verify new feature implementations break old functionality.
« Last Edit: January 14, 2019, 01:23:45 am by littleboot »
 

Offline DerekG

  • Frequent Contributor
  • **
  • Posts: 853
  • Country: nf
Re: Altium Designer 19
« Reply #5 on: January 12, 2019, 05:39:03 pm »
Worst version yet, AD19.0.10

I left Altium Designer at ver 14 for another CAD program.

Best move I ever made.
I also sat between Elvis & Bigfoot on the UFO.
 

Offline mstevens

  • Regular Contributor
  • *
  • Posts: 79
Re: Altium Designer 19
« Reply #6 on: January 13, 2019, 02:19:53 am »
Dude you must have stock in this "other" company. That is all you talk about. I own an Altium license and have compared it to this "other" package and by far Altium has more features and to me is easier to use. You seem to have nothing to contribute but "I switched." Ummm Ok!

Further if I am switching from Altium it would be to Orcad; which is industry standard and priced reasonalbly.
« Last Edit: January 13, 2019, 02:24:38 am by mstevens »
 
The following users thanked this post: Warhawk

Offline mstevens

  • Regular Contributor
  • *
  • Posts: 79
Re: Altium Designer 19
« Reply #7 on: January 13, 2019, 02:32:17 am »

We pay good money for the software tool and I feel like a beta tester.

You are a beta tester. The new AD completely rewritten, new language and 64-bit. Bare with Altium or use AD17. It seems you want or need the new features or you would be using AD17 or older. Sometimes one cannot understand the complexity of programming such a monolithic program until one has done it.


About the "but I pay" argument to come. You don't have pay. Quit paying. Then there would be no need to complain.


The software cannot get better without this "beta testing" period. Again, as this is a completly new platform it will take some time to find and fix the bugs.



 

Offline Bud

  • Super Contributor
  • ***
  • Posts: 2987
  • Country: ca
Re: Altium Designer 19
« Reply #8 on: January 13, 2019, 03:01:05 am »
Altium does not have beta testing "period". Altium is always in beta testing state. That is the problem. It is hard to remember a stable version they had.
 

Offline mstevens

  • Regular Contributor
  • *
  • Posts: 79
Re: Altium Designer 19
« Reply #9 on: January 13, 2019, 06:07:09 am »
Altium does not have beta testing "period". Altium is always in beta testing state. That is the problem. It is hard to remember a stable version they had.

Then purchase and use something that is not in perpetual beta.
 

Offline DerekG

  • Frequent Contributor
  • **
  • Posts: 853
  • Country: nf
Re: Altium Designer 19
« Reply #10 on: January 13, 2019, 01:44:57 pm »
Further if I am switching from Altium it would be to Orcad; which is industry standard and priced reasonalbly.

Excellent idea. OrCAD has been around a long time & is a very powerful & mature product. Should you ever get sick of Altium Designer, taking your own advice would likely be a very big step up in productivity for you.
I also sat between Elvis & Bigfoot on the UFO.
 
The following users thanked this post: kony

Offline littleboot

  • Contributor
  • Posts: 11
  • Country: us
Re: Altium Designer 19
« Reply #11 on: January 14, 2019, 12:58:28 am »
@mstevens

I tought Altium 18 was the beta for Altium 19. I tought wrong.

Wrong altium had a Beta testing period, Altium 360 is now in closed beta at this moment :palm::

Don't mind paying for the license but paying for support and wasting your time is very frustrating.

Please don't get me wrong I like altium as design tool. I complain because I hope altium reads this and wakes up! Starts properly testing there software before release and shifts focus on fixing bugs and making the program stable and fast. Not on adding new features.
« Last Edit: January 14, 2019, 01:04:58 am by littleboot »
 

Offline ajb

  • Super Contributor
  • ***
  • Posts: 1536
  • Country: us
Re: Altium Designer 19
« Reply #12 on: February 06, 2019, 06:28:06 am »
I've finally had an opportunity to use AD19 for real, and on the whole it's been decently stable.  I say it *has* been, because just now where it did that thing where it has an access violation during a command, so you can't run any other commands, and if you try to save it gives you that infuriating "a command is currently in progress and the file can't be saved" message where you can only save a copy.  I guess some things will never change.  Fortunately I was able to save a copy on the first try, because after a bit of trying to fight with it even saving a copy stopped working!

 

Offline snoopy

  • Frequent Contributor
  • **
  • Posts: 552
  • Country: au
    • Analog Precision
Re: Altium Designer 19
« Reply #13 on: February 07, 2019, 10:57:03 am »
I had a go at AD19 the other day but had to go back to AD17 because I was so used to its layout and where everything was which has not been duplicated in 19.
 

Offline ddavidebor

  • Super Contributor
  • ***
  • Posts: 1018
  • Country: it
    • Fermium LABS website
Re: Altium Designer 19
« Reply #14 on: February 09, 2019, 06:51:06 am »
The BOM updates are really great but even with the latest 19.0.12 release full of bugfixes it crashes every now and then.
Davide
Davide Bortolami,
Fermium LABS srl
 

Offline snoopy

  • Frequent Contributor
  • **
  • Posts: 552
  • Country: au
    • Analog Precision
Re: Altium Designer 19
« Reply #15 on: February 09, 2019, 12:29:09 pm »
Is there anyway of getting back the old dialog boxes with the explanatory diagrams ?
 

Offline ddavidebor

  • Super Contributor
  • ***
  • Posts: 1018
  • Country: it
    • Fermium LABS website
Re: Altium Designer 19
« Reply #16 on: February 17, 2019, 06:33:55 am »
What dialog boxes are you referring to?
Davide Bortolami,
Fermium LABS srl
 

Offline snoopy

  • Frequent Contributor
  • **
  • Posts: 552
  • Country: au
    • Analog Precision
Re: Altium Designer 19
« Reply #17 on: Today at 02:19:37 pm »
What dialog boxes are you referring to?

It's ok. I've kind of got used to AD19 now. The 64 bit version is much better at handling complex 3D images since it is not limited by the 32 bit address space ;)

cheers
david
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf