Adhesive to stick on a rubber pad

[jayco242]

Hi,
  I will ask this in beginners as i am not sure where else this will go. I need to stick a large rubber pad onto the bottom of a few project boxes. Wikipedia says i need a removable adhesive. The pad would need to be removed to get at some screws. Obviously super glue is out of the question. does anybody know what I can use that is also accessible to general public? Gallon size or industrial quantities are too much.
  Thanks
    Jason

[Signal32]

Double sided tape / pads ?
http://www.ebay.com/sch/i.html?_odkw=double+sided+tape+removable&_sop=12&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR11.TRC2.A0.H0.Xdouble+sided+tape+.TRS1&_nkw=double+sided+tape+&_sacat=0
http://www.ebay.com/sch/i.html?_odkw=double+sided+tape&_sop=12&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdouble+sided+pad.TRS0&_nkw=double+sided+pad&_sacat=0

Depends how strong you need the bond to be.

Or permanent glue some velcro on feet + case if you think you'll be accessing the screws all day long

But you're probably looking for the glue'y gel'y stuff that sticks but doesn't dry. I don't know the commercial name for that, I would be interested to find out.

[Cerebus]

Neoprene cement. Look for the type used either for wetsuit manufacture/repair or shoe* manufacture/repair. Depending on the type of 'rubber' you have it might need the surface treating either with a specialist primer or passing through an open flame before gluing.

*This type often goes under the name 'colle de cologne'.

[IanB]

I would use something like this: http://multimedia.3m.com/mws/media/796078O/rubber-and-vinyl-80-spray-adhesive.pdf

(Which is indeed neoprene cement.)

I would punch holes in the rubber pad where the screws are.

[alsetalokin4017]

3M / Permatex Weatherstrip Adhesive. Available in yellow or black, at your car parts store.

[houdini]

+1 for weatherstrip adhesive.

[bitseeker]

+1 for punching holes in the pad for easy access to the screws.