« previous next »
Pages: [1]   Go Down

Author Topic: Atmel debugWIRE  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline AztlanpzTopic starter

  • Regular Contributor
  • *
  • Posts: 100
  • Country: us
Atmel debugWIRE
« on: November 22, 2017, 02:33:04 pm »
anyone know if you can use debugWire on an Atmel Atmega328p; and if yes do you have an schematic.




Aztlan
Logged
 

Online ataradov

  • Super Contributor
  • ***
  • Posts: 11260
  • Country: us
    • Personal site
Re: Atmel debugWIRE
« Reply #1 on: November 22, 2017, 05:39:25 pm »
DebugWire works over a reset pin. You will also have to connect VCC and GND from the target to the debugger. There is no schematic for this. And atmega238p does support DebugWire.
Logged
Alex
 

Online Ian.M

  • Super Contributor
  • ***
  • Posts: 12860
Re: Atmel debugWIRE
« Reply #2 on: November 22, 2017, 06:20:45 pm »
Atmel Studio and a supported debugWire capable debugger will need a full 6 pin Atmel ISP connection to the ATmega328P to be able to program its fuses to enter/exit debugWire mode.
Also, you cant have any capacitor on /RESET.
Logged
 

Offline AztlanpzTopic starter

  • Regular Contributor
  • *
  • Posts: 100
  • Country: us
Re: Atmel debugWIRE
« Reply #3 on: November 23, 2017, 01:27:39 am »
thanks for all the help
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee