« previous next »
Pages: [1]   Go Down

Author Topic: Capacitor swap  (Read 1046 times)

0 Members and 1 Guest are viewing this topic.

Offline ZnfrljTopic starter

  • Newbie
  • Posts: 2
  • Country: si
Capacitor swap
« on: December 15, 2018, 11:02:54 am »
Hi,

I am trying to fix a bad Samsung LCD power supply (running on AC 230V mains).

If I swap the bad 100uF 450V cap with a 100uF 400V I have at hand, it should be ok. Right?

The peak AC voltage should not exceed 325V +/- 15V.

Thanks!
« Last Edit: December 15, 2018, 11:08:05 am by Znfrlj »
Logged
 

Online Psi

  • Super Contributor
  • ***
  • Posts: 9951
  • Country: nz
Re: Capacitor swap
« Reply #1 on: December 15, 2018, 11:37:32 am »
It should be ok just to test with. To see if that's the problem or not.
But once you fix it permanently i would replace with 450V
Logged
Greek letter 'Psi' (not Pounds per Square Inch)
 
The following users thanked this post: Znfrlj

Offline ZnfrljTopic starter

  • Newbie
  • Posts: 2
  • Country: si
Re: Capacitor swap
« Reply #2 on: December 15, 2018, 12:09:07 pm »
Ok, thanks!
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee