Author Topic: Current to Flux to current  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

Offline J4e8a16nTopic starter

  • Regular Contributor
  • *
  • Posts: 222
  • Country: ca
    • Jean Pierre Daviau
Current to Flux to current
« on: June 30, 2015, 11:25:37 am »
Hi,

About the toroid as a coil.

In a Joule Thief, when the current comes in from 0V,  the coil rĂ©sist the current by storing it in the flux (and magnetic field). When the voltage induced is equal to the Vcc, the flux is full and let the current pass like a wire.  The flux is still there.
When the incoming source current stop or slow down for any reason, the flux will be transform again in a current flowing trying to maintain the flow of a current.
Equipment Fluke, PSup..5-30V 3.4A, Owon SDS7102, Victor SGenerator,
Isn't this suppose to be a technical and exact science?
 

Offline DmitryL

  • Regular Contributor
  • *
  • Posts: 242
  • Country: gb
Re: Current to Flux to current
« Reply #1 on: June 30, 2015, 02:06:08 pm »
I think that Maxwell, Heaviside and co. explained it slightly better.
https://en.wikipedia.org/wiki/Maxwell%27s_equations
 

Offline J4e8a16nTopic starter

  • Regular Contributor
  • *
  • Posts: 222
  • Country: ca
    • Jean Pierre Daviau
Re: Current to Flux to current
« Reply #2 on: June 30, 2015, 02:50:10 pm »
the flux is full and let the current pass like a wire.

It  is a simple question. The flux is still there?  It wait around the coil?

JP
Equipment Fluke, PSup..5-30V 3.4A, Owon SDS7102, Victor SGenerator,
Isn't this suppose to be a technical and exact science?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf