Eagle OM-B restoration project

[M0BSW]

As many of you know I'm learning and keep plodding along slowly at times, until I understand what I'm doing, anyway I saw this on ebay, cost me £10.00p nice clean unit accept for the dust I didn't clean off, all the values are out , which I expected, all the capacitor are of the paper and wax type, got to be donkey's years old. So I'm going to put all new capacitors in it, and hope to have a nice Capacitance Subsitiution box, after all that what  type of capactitors should I replace them with polyester ?, so far you all have been excellent teachers, hope I've not asked a question to much.
Paul

[SeanB]

100pF I would suggest a silver mica 500v unit, the 1n to 47n I would suggest polypropylene 1kV units and for the 100n and 220nF units polycarbonate 630V units. Best quality units you can get, from reputable manufacturers.

[M0BSW]

Thank You Sean I will  follow your suggestion, ordering online from RS components ,I pass them on the way to work, thanks again
Paul

[SeanB]

They will be good, try to get close tolerance units as well, though they will be quite a bit more expensive.