Could you please look over this schematic and tell me if it will work (assuming the right signals are applied to p1 by the MCU/ADC board. It's my first circuit of this scale, so I wanted to get a second opinion on it before I hit the "buy" button.
Schematic(KiCad):
http://dl.dropbox.com/u/11366066/LdPSU.sch Design goals(not set in stone, I know the low current range accuracy will probably not be that good):
http://dl.dropbox.com/u/11366066/DesignCriteria.txt Image is below:
Thanks a bunch - Connor!