« previous next »
Pages: [1]   Go Down

Author Topic: First Electronics video  (Read 3813 times)

0 Members and 2 Guests are viewing this topic.

Offline victorTopic starter

  • Regular Contributor
  • *
  • Posts: 110
  • Country: 00
  • Boy who writes code and take things apart
    • vitim.us
First Electronics video
« on: June 17, 2015, 05:29:24 am »
A while ago I posted this tutorial Turn a broken laptop screen into a portable light table for drawing on Instructables and it got featured on the site. This made me pretty happy.

Since then I got so many questions, that I decided to record a little "tutorial" on how to find the pin out of those inverter boards.



I always wanted to do something like this for a long time, but I was never confident enough to do it.

I know that this is very, very beginner level to this electronic engineering forum, although this is more of a hacking thing, I want to share this with the community anyway, and would like to have my video criticized. I'm more concerned about my foreign english than anything, and I know that I couldn't get some pronunciations right. but yeah, I really would appreciate any feedback on how bad you think it is. And honestly if I should persist on doing more videos.

 :palm:
Logged
your body is limited, but not your mind
 

Offline Shock

  • Super Contributor
  • ***
  • Posts: 4218
  • Country: au
Re: First Electronics video
« Reply #1 on: June 17, 2015, 01:22:52 pm »
Looks good to me I think you got the idea across quite clear. Would be nice if you added some annotations about the dangers of electrocution from the inverter output past the HV transformer (and not to use your multimeter to test it).

Logged
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: First Electronics video
« Reply #2 on: June 17, 2015, 01:33:02 pm »
Nice work.
Audio is the right level and nice and clear which is most important.
Screen capture quality is good.
Pace is nice and you got your point across.
Nothing to nit pick at all really.
Do make more, you never know where it might lead!
Logged
 

Offline rsjsouza

  • Super Contributor
  • ***
  • Posts: 5986
  • Country: us
  • Eternally curious
    • Vbe - vídeo blog eletrônico
Re: First Electronics video
« Reply #3 on: June 17, 2015, 02:35:00 pm »
Excellent video! The approach of using an image editor to follow both the datasheet and the board photograph is very clever.
Logged
Vbe - vídeo blog eletrônico http://videos.vbeletronico.com

Oh, the "whys" of the datasheets... The information is there not to be an axiomatic truth, but instead each speck of data must be slowly inhaled while carefully performing a deep search inside oneself to find the true metaphysical sense...
 

Offline Shock

  • Super Contributor
  • ***
  • Posts: 4218
  • Country: au
Re: First Electronics video
« Reply #4 on: June 17, 2015, 02:36:22 pm »
Quote from: EEVblog on June 17, 2015, 01:33:02 pm
Do make more, you never know where it might lead!

Recent evidence shows that excessive electronics videos leads to making babies. Congratulations, btw. :)
Logged
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: First Electronics video
« Reply #5 on: June 17, 2015, 02:38:39 pm »
Quote from: Shock on June 17, 2015, 02:36:22 pm
Recent evidence shows that excessive electronics videos leads to making babies.

And grey hairs.
And writing forum posts at 12:38am
Logged
 

Offline lapm

  • Frequent Contributor
  • **
  • Posts: 564
  • Country: fi
Re: First Electronics video
« Reply #6 on: June 17, 2015, 05:13:05 pm »
Nice video... Liked how you used graphics to clear things..
Logged
Electronics, Linux, Programming, Science... im interested all of it...
 

Offline Aodhan145

  • Frequent Contributor
  • **
  • Posts: 403
  • Country: 00
Re: First Electronics video
« Reply #7 on: June 17, 2015, 06:42:37 pm »
Nice video. I need to make one of those light boxes now.  :-+
Logged
 

Offline victorTopic starter

  • Regular Contributor
  • *
  • Posts: 110
  • Country: 00
  • Boy who writes code and take things apart
    • vitim.us
Re: First Electronics video
« Reply #8 on: June 18, 2015, 02:42:27 am »
Thanks for all the supportive comments
Logged
your body is limited, but not your mind
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee