Oops derped out on the link. Here is the correct one:
http://imgur.com/a/iLOWWI can't attach the PDF here because it's too big. I'm not really talking about any one thing in the design document, this is a question on the overall build. For example, the kit included two boards, but only discusses one board. However, it has enough components to complete two full boards EXCEPT for the opamps (LME). The document is strangely written, going into absolute novice detail about soldering, but then assuming a fairly advanced understanding of electronics for the actual implementation.
So my question is basically, is that one board sufficient for stereo amplification? If so, how do I wire up the audio signals in and out for stereo, with only the Vin/0V and Vout/0V. And if not, how does the second board come into play?
Really appreciate any help!