Author Topic: help identify connector  (Read 1815 times)

0 Members and 1 Guest are viewing this topic.

Offline DaxxinTopic starter

  • Regular Contributor
  • *
  • Posts: 213
help identify connector
« on: July 20, 2017, 06:54:32 pm »
hi look like smb but bigger

 

Offline Neomys Sapiens

  • Super Contributor
  • ***
  • Posts: 3268
  • Country: de
Re: help identify connector
« Reply #1 on: July 20, 2017, 08:34:15 pm »
Is the center contact a socket like with SMB?
Outer Sleeve is completely solid?
 

Offline DaxxinTopic starter

  • Regular Contributor
  • *
  • Posts: 213
Re: help identify connector
« Reply #2 on: July 21, 2017, 02:59:59 am »
yes , here the side

 

Offline Neomys Sapiens

  • Super Contributor
  • ***
  • Posts: 3268
  • Country: de
Re: help identify connector
« Reply #3 on: July 22, 2017, 11:30:17 pm »
Might be 1.6-5.6 (click-lock variant) or the ominous 'miniature push-on' (roughly BNC-sized) mentioned but not shown in the catalogue from Automatic Connector. Can you measure the outer diameter of the serrated part? Metric designations are outer dia. of inner conductor - inner dia. of outer conductor.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf