« previous next »
Pages: [1]   Go Down

Author Topic: Help Identifying a component.  (Read 2311 times)

0 Members and 1 Guest are viewing this topic.

Offline RodgerE1Topic starter

  • Newbie
  • Posts: 2
Help Identifying a component.
« on: April 11, 2013, 05:58:32 pm »
Anyone know what this is?
Logged
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Re: Help Identifying a component.
« Reply #1 on: April 11, 2013, 06:04:23 pm »
Almost definitely a transformer for a switch mode power supply. They're usually custom, so you're probably not going to find much by looking up the number (I didn't).
Logged
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5126
  • Country: nl
Re: Help Identifying a component.
« Reply #2 on: April 11, 2013, 06:12:56 pm »
Yes, SMPS transformer, 2 windings.

Found it here: (C2802)  http://www.shangming.com.tw/itemlist-EF.html

It says 8 pins there, but the rest seems to match. Do you think it's broken?

Logged
Keyboard error: Press F1 to continue.
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Re: Help Identifying a component.
« Reply #3 on: April 11, 2013, 06:15:29 pm »
Quote from: PA0PBZ on April 11, 2013, 06:12:56 pm
It says 8 pins there, but the rest seems to match. Do you think it's broken?

I'd say even that matches, if you don't count floating pins.
Logged
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5126
  • Country: nl
Re: Help Identifying a component.
« Reply #4 on: April 11, 2013, 06:16:56 pm »
Quote from: c4757p on April 11, 2013, 06:15:29 pm
I'd say even that matches, if you don't count floating pins.

Yeah, but that is a weird way to specify your product.
Logged
Keyboard error: Press F1 to continue.
 

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 16276
  • Country: za
Re: Help Identifying a component.
« Reply #5 on: April 11, 2013, 06:47:07 pm »
The rest are to hold it to the board.
Logged
 

Offline RodgerE1Topic starter

  • Newbie
  • Posts: 2
Re: Help Identifying a component.
« Reply #6 on: April 11, 2013, 06:55:13 pm »
Wow, thanks for all the replies!
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee