Help with getting the right resistor

[britsmp]

Hi

I have a V6AC Charger that is giving me a Short Err I noticed a resistor that seems damaged. I just need some help in getting the right parts as I don't want to mess this up.  The attachment with the blue pcb is my model the closest I could find was the model with the red pcb. To be honest im not good when it comes to colors  I would appreciate if someone could help me please.

Thank you 

[JoeN]

Green Black Silver Gold Black?  If so, 0.5 ohm, 5%.  This is a pretty common value for a current-sense resistor.

You might want to break out the multimeter and see if either are still good and what the value actually is.  The second picture indicates they are the same value, but your board is a little hard to tell.

[britsmp]

Thanks JoeN

The one on the right Green Black Silver Gold Black measures  4.2 ohm

The other one Black Gold Silver Green Black Gives me 1.998M ohm on the meter

If I look closely under the resistor on my board the colors do match now I just need to confirm value are they both 0.5 ohm ?

[britsmp]

could the Black Gold Silver Green Black Given be a 0.05 ohm ?