Help with transfer function and circuit design

[pas2007]

Hello i am new to this forum.

I want to design a circuit with 5 opamps that implements this function transfer: G(s)=10/[(s+1) (s+5)]

it must be like this: https://www.dropbox.com/s/opsaabvrvighvqm/opamp.JPG?dl=0

i don't know much about this type of project but any help would be great.

Thank you

[LvW]

Hello i am new to this forum.

I want to design a circuit with 5 opamps that implements this function transfer: G(s)=10/[(s+1) (s+5)]

it must be like this: https://www.dropbox.com/s/opsaabvrvighvqm/opamp.JPG?dl=0

i don't know much about this type of project but any help would be great.

Thank you

It is surprising that you are going to use 5 opamps for such a simple circuit.
It is a second order lowpass that can be realized by a cascade of two opamp circuits as shown in the link.
As an alternative, you can use two simple first order RC stages and a separate gain stage.
Together with buffer decoupling you need three opamps.