How to put a device output into a modern TV that originally outputted to UHF/VHF

[gooseEL34]

Hey all-

I was interested in seeing if an old Timex Sinclair still worked and realized that I have no TVs with screw terminals anymore.

I was wondering how to get the output of a RF switch into a modern TV?  I tried taking the two wires with the spade connectors and connecting them to the pin and shield of a male RCA and then going into the composite IN of the TV but that did not work (maybe it should and my switch is bad?)


Thanks for any thoughts
Tim

[sleemanj]

https://www.google.co.nz/search?q=rf+to+composite&oq=rf+to+c&aqs=chrome.1.69i57j0l5.3694j0j4&sourceid=chrome&es_sm=93&ie=UTF-8

[jwm_]

You can pull the composite video off the board before it goes to the RF modulator if you don't mind a small amount of soldering. http://www.mainbyte.com/ts1000/composite.html

I recently did a similar mod to get s-video (seperate chroma and luminance) out of a VIC-20. like night and day.