I need to find a 10 position DIP switch that can handle 12-24VDC / VAC 1amp

[dw8000]

I am designing a very simple circuit that is going to take voltage @ 12-24VDC / VAC 1amp in one side and out the other through a 10 position open/close switch of some sort. Also was hoping to be able to pass analog USA telephone line as well @ 52VDC 35ma and ring voltage 90VAC 13ma. Well the design is simple but there is a flaw. The 10 position DIP switch I would like to use shows switching capacity at ratings below the objective. I want to keep the cost below $2 USD per 10 position switch. Any ideas?


24V 25ma
http://www.mouser.com/ProductDetail/NKK-Switches/JS0108AP4-S/?qs=sGAEpiMZZMtadyunAd%252b8Z6LGl%252bMzOERK

[Flunze]

It will be impossible OR you will not be able to pay such a high price. Better use a circuit, that can use low current signals like throught that, that will switch your other stuff on. Or, the last piece, that makes noise: Relays.