« previous next »
Pages: [1]   Go Down

Author Topic: Inductor question  (Read 1442 times)

0 Members and 1 Guest are viewing this topic.

Offline desertgregTopic starter

  • Contributor
  • Posts: 35
  • Country: us
Inductor question
« on: April 29, 2017, 10:44:22 pm »
I'm looking at a reference schematic which has an inductor but does not specify the inductance.  The inductor is labelled with 0.5amp 120 Ohm 100Mhz.  How do I compute the inductance from these values?

Logged
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12298
  • Country: au
Re: Inductor question
« Reply #1 on: April 30, 2017, 12:22:15 am »
It might make things easier if we could see the schematic....
Logged
 

Offline lem_ix

  • Regular Contributor
  • *
  • Posts: 192
  • Country: cs
Re: Inductor question
« Reply #2 on: April 30, 2017, 12:46:18 am »
Probably a ferrite for about 100 mA current tops?
Logged
 

Offline desertgregTopic starter

  • Contributor
  • Posts: 35
  • Country: us
Re: Inductor question
« Reply #3 on: April 30, 2017, 02:12:22 am »
I've attached a pic of the part of the schematic I'm talking about.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee