looking for a connector

[ealex]

Hello

I'm trying to find a female connector similar to the tall ones used in this photo:


the entire page link is : http://www.nixieclock.org/?p=411

I could only find something like this: http://www.mouser.com/ds/2/418/NG_CD_66504_AP-691769.pdf

the one i found has a crimp-able end, instead of a solder pin.
i could crimp it over a 0.5 - 1mm wire then solder that wire in, or i could just crimp it with no wire and use the crimped end as a  solder terminal.

any other hints on what to look for ?  the tube's pin is 1mm in diameter and i need at least a height of 11-12mm to clear the tube's end

[dmills]

Looks like the sort of thing mill-max specialise in?

https://www.mill-max.com/product_finder/1

Of course the mill-max stuff is expensive so it is probably a cheaper version, but if you only need small quantities....

Regards, Dan.

[klunkerbus]

Searching on "tube socket pins" brings up some possibilities to look at.  At least looking through the image search results. 

[ealex]

thanks guys
the "tube socket pins" did the trick.

i've found this : https://www.tindie.com/products/UnusualElectronics/pack-of-80-nixie-tube-sockets/

or: http://www.pvelectronics.co.uk/index.php?main_page=product_info&cPath=4_11&products_id=28&zenid=9b4a00f168a6eb1b8045a8b06066d996

now i need to find someone that's still selling these