make Dual Link DVI to two DVI single Link

[w_leds]

make Dual Link DVI to two DVI single Link

hellos I try to make the scheme a cable like the photo because I'm looking I found nothing even close to what I'm looking for

http://www.nipponlabs.com/dvi-adt-1m2f.html


ps) sorry for my english translation by google

[dave_k]

http://www.ebay.com/itm/DMS-59-to-Dual-DVI-Y-Video-Splitter-Adapter-Cable-Dell-H9361-Used-/300952242047?pt=US_Video_Cables_Adapters&hash=item461226c77f

ta-da!

[w_leds]

this is not the correct connector ): . more I try to do it by myself so I need a schema !

[gxti]

So you want to break out the second set of 'links' to a different connector? I was going to do the same thing once but with HDMI, so that I could use a pair of 30' HDMI cables to carry dual-link DVI, but then I found a 30' dual-link DVI cable so I never made it. The schematic for it is obvious, figure it out.

[Monkeh]

And you plan to what, drive two independent displays from one DVI port?

[w_leds]

screen it seems to me are forced to copy areas

[w_leds]

screen it seems to me are forced to copy areas

I found it but I'm not about to pins plug and play digital clock, he must connect the pins to the same place for two DVI single link?

http://www.veritlabs.com/resources/diagrams/dvi_pinout_01.png

[Monkeh]

You cannot use a single DVI port (dual link or not) to drive two independent displays. You can clone displays, this does not require dual link, and there are off the shelf products for this.

[w_leds]

You cannot use a single DVI port (dual link or not) to drive two independent displays. You can clone displays, this does not require dual link, and there are off the shelf products for this.

you mean I'm not about to have all understood the meaning after translation

[wraper]

How this is supposed to work? There is only one DDC clock/data link in dual link connector. There are not two separate DVI interfaces in a single connector.

[w_leds]

My goal is to: https://docs.google.com/drawings/d/1gtF4byb5VBjdA9oF6CixwnFB3OdRKdtvP389e9Kfqhs/edit?usp=sharing

[Monkeh]

My goal is to: https://docs.google.com/drawings/d/1gtF4byb5VBjdA9oF6CixwnFB3OdRKdtvP389e9Kfqhs/edit?usp=sharing

Only if you want two monitors showing the same image.

[w_leds]

My goal is to: https://docs.google.com/drawings/d/1gtF4byb5VBjdA9oF6CixwnFB3OdRKdtvP389e9Kfqhs/edit?usp=sharing

Only if you want two monitors showing the same image.

yes after it would have been possible to consider in times q 'extra screen it would ect better but those not required

[w_leds]

My goal is to: https://docs.google.com/drawings/d/1gtF4byb5VBjdA9oF6CixwnFB3OdRKdtvP389e9Kfqhs/edit?usp=sharing

Only if you want two monitors showing the same image.

you have the wiring diagram ?

[gxti]

What you want to do is not possible. Sorry.

[wraper]

My goal is to: https://docs.google.com/drawings/d/1gtF4byb5VBjdA9oF6CixwnFB3OdRKdtvP389e9Kfqhs/edit?usp=sharing

Only if you want two monitors showing the same image.

you have the wiring diagram ?

To clone display image, you would to need connect both monitors to the same link. However you cannot just connect them in parallel because that would cause impedance mismatch and signal integrity would be completely ruined. You would need some TMDS repeater IC which can make 2 outputs with the same signal from single input.