need 5.9-6 inch tft display with hdmi in

[umutkoker]

I bought 5.9 - 6 inch displays with hdmi dsi driver board from different manifacturers, we want to use this on our mass production vr glasses.

But they all doesnt work with our 1920x1080 resolution device (i think because of their 1080x1920(portrait) resolution). If we plug them to a pc they are working well because pc supports this 1080x1920 resolution. But we dont want to plug it to a pc we want to plug it to a device that supports 1920x1080 resolution.
Do you know a solution for that ( for example another control board)
I need your help,
Yours,
Tan

[danadak]

You will need another controller board, or look at controller chip
on the board you have to see if it would be capable with firmware
changes to support the higher resolution. If it can contact board
vendor to see if that is a possibility.

If you need another controller board you will need cabling to connect
display to board.


Regards, Dana.

[umutkoker]

Hello Dana, I am using the 1920x1080 resolution 6 inch displays that are manifactured for vr glasses in aliexpress. I am searching the internet for days but all the displays driver cards are the same (1080x1920 portrait resolution);I think because of 6 inch mostly use with phones. I cant know where to find a board with a regular landscape 1920x1080. I am getting crasy..