Author Topic: Need help with TTL only termometer and voltmeter and 7 segments display  (Read 1143 times)

0 Members and 1 Guest are viewing this topic.

Offline little_carlosTopic starter

  • Regular Contributor
  • *
  • Posts: 133
Hi, i need to make a voltmeter and a termometer using TTL only chips, and display the info on 7 segment displays, can you tell me which IC's should I use?
 


Offline danadak

  • Super Contributor
  • ***
  • Posts: 1875
  • Country: us
  • Reactor Operator SSN-583, Retired EE
What are the voltmeter and thermometer chips  you are going to use ?

Regards, Dana.
Love Cypress PSOC, ATTiny, Bit Slice, OpAmps, Oscilloscopes, and Analog Gurus like Pease, Miller, Widlar, Dobkin, obsessed with being an engineer
 

Offline little_carlosTopic starter

  • Regular Contributor
  • *
  • Posts: 133
What are the voltmeter and thermometer chips  you are going to use ?

Regards, Dana.
hi, the voltmeter is just a crappy adc reading from 0 to 5V and display the result on a 7 segment display
the thermometer is a lm35, since accuracy is not required
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf