So do you suggest me to increase the capacitor...
No, not exactly!
The only advisement, that I can give to you, is to stop this project until you acquire some knowledge and understanding, at least on the basics, as already mentioned by others.
It seems that you cannot see the dangers that exist in what you are doing!
As you can see i have four transformer
I see, but...
I was using 11m ohm cap
I don't know if a thing like this exists!
But due to less current output i thought some of it
As i got to know cap stops the current flow once they are charged
But that doesn't seem to make a lot of changes.
? ? ?
What do you mean by in phase connection?
This is important, at least, when combining coils...It's one more indication of missing knowledge and understanding.
Can i connect the transformer in series and parallel and then give that supply to bridge rectifier
Of course yes! But, the way of doing that, will give as result:
- what you want to have
- absolutely nothing
- damages to surroundings from transients
- more or less serious injuries up to death
- put in fire your house
Will it be safe?
As it seems, no!
Thanks
You are welcome!
Start studying the basics, there are people here that will help you by answering specific questions. It's a little difficult to design and implement a Formula-1 vehicle, if you don't know the properties of the wheel!