Hello,
I write the first time in this forum and hope resolve with your help my problem.
I bought (via EBAY) VARISPEED V7 OmronV7 V7AZBOP7 1.1 KW
The seller was setting parameters for him use
I have driving (delta conexions) 3x220V/50Hz and current consummation it is 2,9 A. the drive use to mini lathe
My Omron v 7 no good function the drive have noise sound but no start , distance drive ----varispeed it is 6 meters.
not understanding setting parameters for a good function.
so, when command ,, RUN,, the driving start for 0,5 " secundes and stop
the display information cod faulty OL3
Best regardes and please replay me.
IOAN