I’m ready to build ! I received the two ovens today. I have totally disassemble one of them to get all the parts.
Now I’m going to build my Oven to host the Controleo3. This is the first time I do this.
As you can see the oven has two heating elements in series, one 500W top 115V, one 500W bottom 115V but 1000w is not enough.
I think I need to separate these two heating elements, drill new holes and put them in new holes 3cm on the left; then put the two others on the right 3cm from the existing ones and then wire the two ones on the top and the two one on the bottom.
Am I right?!