Author Topic: Extending camera cable for mobile application  (Read 1190 times)

0 Members and 1 Guest are viewing this topic.

Offline Vindhyachal.taknikiTopic starter

  • Frequent Contributor
  • **
  • Posts: 487
Extending camera cable for mobile application
« on: October 30, 2017, 06:17:38 am »
1. Have to extend mobile camera by around 15cm to outer custom body.
Attached is camera pic & its mating connector pic on PCB where camera needs to be connected.

2. Is there any off the shelf 15cm long camera cable extender available? or custom parts available to make so like connectors separately & wire separately which can be then connected or soldered?
 

Offline Mjolinor

  • Frequent Contributor
  • **
  • Posts: 328
  • Country: gb
Re: Extending camera cable for mobile application
« Reply #1 on: October 30, 2017, 10:34:28 am »

There is a high probability of it not working with an extension cable of that length. The capacitance of the cable is probably more than the driver circuitry can handle.
 

Offline RoadRunner

  • Frequent Contributor
  • **
  • Posts: 378
  • Country: de
Re: Extending camera cable for mobile application
« Reply #2 on: October 30, 2017, 11:11:46 am »
extending a high speed bus without taking drivers into consideration going to cause issue.
you can have external USB camera which plug into phone's OTG port.

if you still want to try , you can get your own flex made and mount appropriate connector onto it .
« Last Edit: October 30, 2017, 11:14:03 am by RoadRunner »
 

Offline Raj

  • Frequent Contributor
  • **
  • Posts: 694
  • Country: in
  • Self taught, experimenter, noob(ish)
Re: Extending camera cable for mobile application
« Reply #3 on: October 30, 2017, 02:41:48 pm »
Will buying a snake camera, be a solution for you?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf