I think that you may be a little confused with the SPICE file.
There are three separate examples and one subcircuit given in the file.
You have a screenshot of the chebyshev filter posted yet you are talking about the subcircuit. If you look at the netlist file, you will see that 2 of the 3 examples are commented out (denoted by *) therefore when you run the s-param.cir netlist file only the filter response will be given, as you have shown in your post.
However, it appears that the link for the .lib file for the MRF5711 given in the netlist file does not work (at least it didn't for me) and a quick google search yielded no results.