Author Topic: Schematic software  (Read 6359 times)

0 Members and 1 Guest are viewing this topic.

Offline FlumpTopic starter

  • Frequent Contributor
  • **
  • Posts: 520
  • Country: gb
Schematic software
« on: September 29, 2013, 11:11:26 pm »
Hi All

I would like either an On line or downloadable schematic creation program,
seeing as i only dabble in electronics now and then I don't at this stage want
to invest money in one so I am looking for a free one.

I have found several which on the surface look free but when you register
quickly find out its's time restricted or you have to buy stuff from them etc.

At the moment I just want to create Schematics of circuits in my head so not
looking for anything snazzy.


can anyone suggest some Software please ?
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Re: Schematic software
« Reply #1 on: September 29, 2013, 11:13:56 pm »
KiCad. LTspice is easier but schematic only.
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline lgbeno

  • Frequent Contributor
  • **
  • Posts: 349
  • Country: 00
Schematic software
« Reply #2 on: September 29, 2013, 11:29:41 pm »
Maybe upverter.com or circuits.io
 

Offline Prime73

  • Regular Contributor
  • *
  • Posts: 174
  • Country: ca
Re: Schematic software
« Reply #3 on: September 30, 2013, 12:08:33 am »
What about free version of Cadsoft's Eagle?
 

Offline TerminalJack505

  • Super Contributor
  • ***
  • Posts: 1310
  • Country: 00
Re: Schematic software
« Reply #4 on: September 30, 2013, 12:55:31 am »
You might try Digi-key's Scheme-It.  It doesn't seem too bad for an online schematic capture tool.

There's Tina-TI too.  This is primarily a simulator but you can do schematic capture too, obviously.
 

Offline sleemanj

  • Super Contributor
  • ***
  • Posts: 3020
  • Country: nz
  • Professional tightwad.
    • The electronics hobby components I sell.
Re: Schematic software
« Reply #5 on: September 30, 2013, 03:48:19 am »
I'll throw Fritzing into the ring. 
~~~
EEVBlog Members - get yourself 10% discount off all my electronic components for sale just use the Buy Direct links and use Coupon Code "eevblog" during checkout.  Shipping from New Zealand, international orders welcome :-)
 

Offline FlumpTopic starter

  • Frequent Contributor
  • **
  • Posts: 520
  • Country: gb
Re: Schematic software
« Reply #6 on: September 30, 2013, 09:35:58 am »
Thanks for the sugestions so far :)

I tried Digi-key's Scheme-It a while back and really liked it but you have to register to save
and when i tried it wanted either credit card or company details so i couldnt complete it.


Going to try them all out but at the moment
playing with fritzing.
 

Offline blewisjr

  • Frequent Contributor
  • **
  • Posts: 301
Re: Schematic software
« Reply #7 on: October 02, 2013, 03:53:29 pm »
There is also DipTrace.

They have a Free version that supports 300 pin limitation but you get the full product.  I like how they go by pins instead of board size.  Personally I purchased the standard version with the 300 pin limit because I liked the product a lot and if I ever wanted to do something commercial or whatever I can + it helps support the development of the product.

It is super easy to learn to use.  Everything I learned was just by using it unlike Eagle where you need to scour the internet for tutorials everything in DipTrace is intuitive even making your own parts for it.

Dave has a video on his YouTube channel somewhere and he demonstrates the product without even knowing how to use it.  PS turns out he loved the software because it was easy to just pick up and figure out.
 

Offline Paul Price

  • Super Contributor
  • ***
  • Posts: 1419
Re: Schematic software
« Reply #8 on: October 02, 2013, 04:04:53 pm »
Try Express Schematic. Free and easy to learn and use.

ExpressPCB.com
 

Offline Phaedrus

  • Frequent Contributor
  • **
  • Posts: 714
  • Country: us
Re: Schematic software
« Reply #9 on: October 02, 2013, 04:14:26 pm »
I started with ExpressPCB/ExpressSCH, but I'm moving over to DipTrace; it's a more full-featured product, and can output Gerber files if you ever want to produce the boards you design.
"More quotes have been misattributed to Albert Einstein than to any other famous person."
- Albert Einstein
 

Offline jorisbeurden

  • Newbie
  • Posts: 8
Re: Schematic software
« Reply #10 on: October 03, 2013, 08:47:30 am »
+1 for diptrace, for a free program it is really good. I like that in schematic mode it highlights a whole net if you float above it, making it easy to see if you missed something.
 

Offline blackdog

  • Frequent Contributor
  • **
  • Posts: 736
  • Country: nl
  • Please stop pushing bullshit...
Re: Schematic software
« Reply #11 on: October 03, 2013, 09:39:58 am »
Hi Flump,

Try Splan, Yes its kost you some mony but its good!!!

http://www.abacom-online.de/uk/html/splan.html

This is a schematic made in Splan


Kind regarts,
Blackdog
Necessity is not an established fact, but an interpretation.
 

Offline kripton2035

  • Super Contributor
  • ***
  • Posts: 2572
  • Country: fr
    • kripton2035 schematics repository
Re: Schematic software
« Reply #12 on: October 03, 2013, 10:56:25 am »
+ 1 for diptrace
you can ask for the 500 pins free version, just ask for it on the website
it's free for hobby purpose, you pay only for commercial use (i.e. you earn money with it)
a 500 pins schematic is somewhat really complicated.
 

Offline FlumpTopic starter

  • Frequent Contributor
  • **
  • Posts: 520
  • Country: gb
Re: Schematic software
« Reply #13 on: October 03, 2013, 12:23:41 pm »
thanks guys :)
still trying some of these out

but diptrace seems one of the popular ones
so going to try that next
 

Offline cristoper

  • Contributor
  • Posts: 15
Re: Schematic software
« Reply #14 on: October 05, 2013, 04:49:26 am »
There's gschem from the gEDA project.

If you mostly want to capture circuits for simulation, then qucs is nice with a pretty usable UI.
 

Offline azi

  • Contributor
  • Posts: 16
Re: Schematic software
« Reply #15 on: October 07, 2013, 12:50:39 am »
I will suggest Eagle because if you are bothering to make a schematic, maybe it's a good idea to consider that you might want to design a circuit board and manufacture it at some point.

In all honesty, I am not really happy with Eagle's rendition of schematics, but it did pretty well compared to the other free tools I tried a few years ago. If you are sure you want only a schematic figure, then maybe there is a better tool. At least try it and see what you think.
 

Online xrunner

  • Super Contributor
  • ***
  • Posts: 7496
  • Country: us
  • hp>Agilent>Keysight>???
Re: Schematic software
« Reply #16 on: October 07, 2013, 12:59:44 am »
Try Express Schematic. Free and easy to learn and use.

ExpressPCB.com

I just got this yesterday due to your post, and I really like it. It's very easy to learn. I wanted to document a circuit I was making to interface a radio control output to a relay circuit to disconnect an ant. from a SDR aux. receiver.
I told my friends I could teach them to be funny, but they all just laughed at me.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf