Author Topic: Service Manual for Schlumberger CRC 5071 Scope  (Read 1087 times)

0 Members and 1 Guest are viewing this topic.

Offline BskitterTopic starter

  • Regular Contributor
  • *
  • Posts: 79
  • Country: cz
Service Manual for Schlumberger CRC 5071 Scope
« on: August 15, 2016, 11:32:50 am »
Hello Guys, a friend recently gave me two Scopes that are not working, I am trying to get them both up and running,

The one is a telequipment DM63 which I have found the manual for, but the other one (Schlumberger CRC 5071) has almost no information on the net.

When I turn the scope on a hear a slight sound that the ray on the tube is on but there is nothing on the screen, If I switch the scope over to storage mode there is some faint green on the screen. If I hit the Manual button on the Storage section the whole screen goes green for a few seconds then fades away.

I have tested the power supply and all the output seem good.

There was been some work on the PSU and what looks like the power unit for the Screen.

So, does anybody have a service manual for one of these things or any recommendations on what to test ?

Here are both the scopes.



Byron
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf