Hello Everyone!
My question is about transforming a signal shape to another shape:
The given signal looks like the following:
The normal level is zero volts, in the event of a signal, the voltage rapidly drops (almost instantly) and then slowly coming up to just over zero and then normalizing to zero volts. Basically like a negavite saw-tooht but one side raplidly droping and the other side slowly rising up. Also the signal is very short in time. Because of shape and lenght, the signal cannot be used. A slow ADC would just miss the signal beween its conversion shots, or get a point just anywhere on the signal. For a usefull measure, the ADC should get at least 8 points on the signal.
I'm looking for a way to transfrom the signal into either a nice looking positive sine pulse, or better a trapezoidal shape. The lenght (time) of the signal should also be made longer.
There is no need for a "out of the box"-Solution, thats why the parameters/voltages of the signal are not relevant, i just want help on the topic, like getting knowledge how the signal can be controlled. Can someone here help me with this topic?
Thanks,
Johnny