0 Members and 1 Guest are viewing this topic.
The working is led2 I have also tested all led and they are in working order
Hi , I have a propel orbit hd drone that was working fine, and after a rough landing I replaced the propellers. Tested and was working. The following day I turned on the drone and only 1 led out of the 4 light turns on doesn't blink for connecting to controller or anything. I have looked at many forums and found that propel is not the best at helping out or responding. So decided to pull out the dmm. I found that the working arm is receiving 4ish V and 2 of the non working are at 0.032-0.053 and the last is receiving no power at alll. I am not sure where to begin checking for the shortage and would appreciate any feedback and or help. Thank you Sent from my iPhone using Tapatalk