Author Topic: will this circuit work?  (Read 1696 times)

0 Members and 1 Guest are viewing this topic.

Offline SounduserTopic starter

  • Contributor
  • Posts: 33
will this circuit work?
« on: June 16, 2015, 12:51:13 pm »
I've got an rgb party light that flashes to music.
It's basically LEDs that are switched on the low side by a microcontroller.
I want to connect it to some rgb led strip.
Will this circuit work?


Thanks.

 

Offline PSR B1257

  • Frequent Contributor
  • **
  • Posts: 330
  • Country: de
Re: will this circuit work?
« Reply #1 on: June 16, 2015, 03:35:25 pm »
If the GND-terminals are connected, yes.

The P-channel MOSFET can be replaced by a small signal BJT.
In theory, there is no difference between theory and practice. But, in practice, there is.
 

Offline SounduserTopic starter

  • Contributor
  • Posts: 33
Re: will this circuit work?
« Reply #2 on: June 16, 2015, 08:14:33 pm »
Okay. Just a straight swap with a pnp transistor. No extra resistors?
 

Offline GoneTomorrow

  • Regular Contributor
  • *
  • Posts: 125
  • Country: nz
Re: will this circuit work?
« Reply #3 on: June 17, 2015, 10:44:29 am »
Yep, you already have your base resistor, just emitter to 12v and collector to your MOSFET gate.
 

Offline SounduserTopic starter

  • Contributor
  • Posts: 33
Re: will this circuit work?
« Reply #4 on: June 20, 2015, 11:31:23 am »
What value resistor would you use?

Thanks guys.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf