Author Topic: [FS] Keysight DSOXLAN module (DIY)  (Read 4818 times)

0 Members and 1 Guest are viewing this topic.

Offline romantaoTopic starter

  • Contributor
  • Posts: 36
  • Country: pt
[FS] Keysight DSOXLAN module (DIY)
« on: June 07, 2017, 03:47:06 pm »
Hello everyone

I have for sell 4 dsolanx modules assembled by myself, tested and working.
they are based on the http://anagram.net/nuts/DSOXLAN/ design.

The kit is fully assembled, the ethernet magnetics are from amphenol and include the 3d printed case.

15 Euro plus shipping

Update: 3 2remaining
« Last Edit: September 14, 2017, 05:17:40 pm by romantao »
 
The following users thanked this post: edyno

Offline ralphrmartin

  • Frequent Contributor
  • **
  • Posts: 479
  • Country: gb
    • Me
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #1 on: June 07, 2017, 05:02:17 pm »
Price? Shipping costs?
 

Offline Safar

  • Regular Contributor
  • *
  • Posts: 119
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #2 on: June 27, 2017, 06:05:17 pm »
Just received module. All works fine. Thanks!
 
The following users thanked this post: romantao

Offline romantaoTopic starter

  • Contributor
  • Posts: 36
  • Country: pt
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #3 on: September 14, 2017, 05:18:09 pm »
bump
 

Offline romantaoTopic starter

  • Contributor
  • Posts: 36
  • Country: pt
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #4 on: October 15, 2017, 08:46:45 pm »
still have 3 units available!
 

Offline jaymemaurice

  • Newbie
  • Posts: 1
  • Country: ca
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #5 on: December 08, 2017, 04:12:52 am »
I received mine and it fit and worked great! Was able to telnet into my scope and do what I wanted to do!

It gave the expected "vga" error on start but no harm!

Thanks! Would not hesitate to buy again!!!
« Last Edit: December 08, 2017, 04:14:33 am by jaymemaurice »
 

Online TheSteve

  • Supporter
  • ****
  • Posts: 3743
  • Country: ca
  • Living the Dream
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #6 on: December 08, 2017, 04:27:54 am »
I received mine and it fit and worked great! Was able to telnet into my scope and do what I wanted to do!

It gave the expected "vga" error on start but no harm!

Thanks! Would not hesitate to buy again!!!

Depending on the PCB layout there may be a resistor or 0 ohm jumper you can remove which will stop that error from being displayed. It would also mean you can't configure the network interface from the scope but I am sure most people use DHCP. It would also mean you can't access the scope from BenchVu, but hardly anyone uses that. The web control would still work fine. It is my preference to not have the scope give the error.
VE7FM
 

Offline romantaoTopic starter

  • Contributor
  • Posts: 36
  • Country: pt
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #7 on: February 01, 2018, 10:11:25 pm »
bump
 

Offline romantaoTopic starter

  • Contributor
  • Posts: 36
  • Country: pt
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #8 on: February 21, 2018, 11:37:03 pm »
bump
 

Offline edyno

  • Newbie
  • Posts: 8
  • Country: sk
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #9 on: April 05, 2018, 12:42:12 pm »
Thank you. LAN is working OK :)
DSOX2002A
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #10 on: June 14, 2018, 03:31:08 pm »
I have for sell 4 dsolanx modules assembled by myself, tested and working.
they are based on the http://anagram.net/nuts/DSOXLAN/ design.
The kit is fully assembled, the ethernet magnetics are from amphenol and include the 3d printed case.
15 Euro plus shipping
Update: 3 2remaining
How can I get the module?
I've already written you a PM, but as a newbee I can't yet receive PM at my local post-box.
Could you kindly drop me a line to a.a.sharapov at gmail.com ?
Regards.
 

Offline 77Ribetts

  • Newbie
  • Posts: 9
  • Country: gb
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #11 on: April 16, 2023, 08:16:15 pm »
Hi do you have a module left for sale ?
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #12 on: April 16, 2023, 08:26:21 pm »
Hi do you have a module left for sale ?
Hi. I have. Two.
 

Offline 77Ribetts

  • Newbie
  • Posts: 9
  • Country: gb
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #13 on: April 17, 2023, 10:31:04 pm »
Hi sorry for my late reply i am not used to using forums actively mostley i lurk !    Can you quote a price inc postage to the uk thank you
 
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #14 on: April 18, 2023, 04:12:05 am »
You're not using quotes as well, so let me clarify whether you ask me or someone else?
 

Offline 77Ribetts

  • Newbie
  • Posts: 9
  • Country: gb
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #15 on: April 18, 2023, 04:48:25 am »
You're not using quotes as well, so let me clarify whether you ask me or someone else?
  Hi yes asking you Saa1206 i am not skilled at using the forum sorry for confusion
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #16 on: April 18, 2023, 05:36:57 am »
Hi yes asking you Saa1206 i am not skilled at using the forum sorry for confusion
Don't be sorry, we are all were or are newbees here or there )
Ok, I'll try to reach my post office as soon as possible, asking whether it is possible at all to sent smth ( or receive ) to ( from ) your country. If not I'll propose to ask for help man in the middle, e.g. my colleague at Lithuania.
Anyway this module I received by meen this forum from Brasil or Portugal, it was wery helpfull in liberating the DSO, so I wanna it'll serve someone else, you 77Ribetts.
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #17 on: April 18, 2023, 07:44:26 am »
Can you quote a price inc postage to the uk thank you
Here are the prices and delivery times I've just got at a local post office.
And I won't charge you for anything else cause I would be my pleasure to be of any help to someone like me. I'd rather say anyone here is here just for the same purpose.
So just tell me how fast would you like to receive the module (choices are 2 weeks, 3 - 4 weeks and 4 - 5 weeks ) and what currency would you like be to traslate Russian rubles to judge will it siut you or not.
 

Offline 77Ribetts

  • Newbie
  • Posts: 9
  • Country: gb
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #18 on: April 18, 2023, 10:55:59 pm »
Can you quote a price inc postage to the uk thank you
Here are the prices and delivery times I've just got at a local post office.
And I won't charge you for anything else cause I would be my pleasure to be of any help to someone like me. I'd rather say anyone here is here just for the same purpose.
So just tell me how fast would you like to receive the module (choices are 2 weeks, 3 - 4 weeks and 4 - 5 weeks ) and what currency would you like be to traslate Russian rubles to judge will it siut you or not.
Hi the 4 - 5 week option sounds good will you accept paypal ?
 

Offline Saa1206

  • Contributor
  • Posts: 11
  • Country: ru
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #19 on: April 19, 2023, 08:07:36 pm »
will you accept paypal ?
I would if I get an idea how to process the payment. I applyed to my bank and thay say that given circumstances pose too many obstacles, I can't pass through. It's now my turn to say sorry.
 

Offline 77Ribetts

  • Newbie
  • Posts: 9
  • Country: gb
Re: [FS] Keysight DSOXLAN module (DIY)
« Reply #20 on: April 19, 2023, 10:53:45 pm »
will you accept paypal ?
I would if I get an idea how to process the payment. I applyed to my bank and thay say that given circumstances pose too many obstacles, I can't pass through. It's now my turn to say sorry.
No worries or need for sorry as u said. I was leaning towards trying to make a dsolan of some kind . and you have helped me to up my post count without (hopefully) offending any grey beards ..  :o i have not un bricked my scope yet so i have time. thanks for your time dude bye yan
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf