Author Topic: Gone  (Read 2017 times)

0 Members and 1 Guest are viewing this topic.

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Gone
« on: November 30, 2017, 02:39:57 am »
Gone

Hi all,

I bought this supply a few years back on eBay as part of a bigger project and it got damaged in shipping.  I've never tried any of the boards so I'm not sure what's working or not.

- The front panel has the VFD, PCB, the rotary encoder and all buttons - both sides of the front panel are cracked/damaged (see pic)
- It's missing the upper PCB
- Lower PCB top appears to be complete and has no visible damage or burnt components and the rear panel is clean and complete, includes heatsinks and fans
- Lower PCB bottom has a bodge wire, see pic
- The chassis is straight and has no dings
- Mains transformer appears to be in good nick

Free for pickup in Los Angeles.

I won't ship, if you ask me to I won't reply.

Thanks!
Ruairi

Gone
« Last Edit: June 15, 2020, 12:28:46 am by ruairi »
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Re: Agilent E3647A Bench Power Supply - Dual 0-60V Bench PSU - Project/Faulty
« Reply #1 on: November 30, 2017, 02:41:37 am »
Main board
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Re: Agilent E3647A Bench Power Supply - Dual 0-60V Bench PSU - Project/Faulty
« Reply #2 on: November 30, 2017, 02:45:39 am »
Front Panel
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Re: Agilent E3647A Bench Power Supply - Dual 0-60V Bench PSU - Project/Faulty
« Reply #3 on: November 30, 2017, 02:53:09 am »
Front panel sides damage
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Re: Agilent E3647A Bench Power Supply - Dual 0-60V Bench PSU - Project/Faulty
« Reply #4 on: November 30, 2017, 03:04:59 am »
Bodge on Main PCB bottom
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Price drop.  Would love this to go to someone who can use it for a Power Supply project or repair of an existing unit.

 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
Bumping this, free for pickup.  Missing boards but will have parts to repair another unit or as the basis for a DIY PSU, the transformer is massive.

Again, I won't ship.  If you ask I will ignore.

 

Offline maginnovision

  • Super Contributor
  • ***
  • Posts: 1963
  • Country: us
Where about in LA?
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
 

Online bdunham7

  • Super Contributor
  • ***
  • Posts: 7727
  • Country: us
Do you happen to have the service manual with schematic and parts list for this?  I was trying to find one and none have any details on that transformer.  I'm sort of interested--the price is right--but I'd like to know the details on the transformer before I go sneaking another hunk of junk into the garage... :)
A 3.5 digit 4.5 digit 5 digit 5.5 digit 6.5 digit 7.5 digit DMM is good enough for most people.
 

Offline ruairiTopic starter

  • Frequent Contributor
  • **
  • Posts: 302
  • Country: us
I don't, I may have had at one time but if I did I found it in the usual spots online.  No hard copies.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf