Author Topic: FS(EU): Large Augat wire-wrap board  (Read 1196 times)

0 Members and 1 Guest are viewing this topic.

Offline xtechTopic starter

  • Regular Contributor
  • *
  • Posts: 78
  • Country: pl
FS(EU): Large Augat wire-wrap board
« on: October 10, 2017, 05:03:25 pm »
I have to sell large Augat 8136-UG400 wire-wrap board. Three level gold-covered pins. Something for TTL computer builders :)

Dimensions: 355x405mm
35 rows, 145 columns in raster 0.1"

Board is already wrapped so needs unwrapping. I've done that for other piece of same type and it takes about 8h of intensive work. Used hand
unwrapping tool (OK WSU-30M) mounted in the battery drill, wire cutters and tweezers. I don't know if this board was used in the past or only wire-wrapped by Augat and left as is. Board is still in original box. Very good condition, some pins can be found to be slighty bent but can be easily straighten.

Shipping to EU with courier (UPS/DPD, even with post as registered parcel) - by DPD it costs from 16 euro (Germany) up to 40 (Greece) euro depends on location. Please ask.

I want to get 230 euro for this board.
 

Offline GreggD

  • Regular Contributor
  • *
  • Posts: 136
  • Country: us
Re: FS(EU): Large Augat wire-wrap board
« Reply #1 on: October 10, 2017, 06:14:38 pm »
I have an Augat wire wrap board that looks just like that.
Never been used. All wrap pins straight. Bellbrook Ohio
 

Offline xtechTopic starter

  • Regular Contributor
  • *
  • Posts: 78
  • Country: pl
Re: FS(EU): Large Augat wire-wrap board
« Reply #2 on: October 15, 2017, 07:23:46 am »
I think it's time to lower the price - from now it is 160 euro (+shipping).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf