Author Topic: R&S SMIQ Schematics  (Read 1477 times)

0 Members and 1 Guest are viewing this topic.

Offline hscadeTopic starter

  • Contributor
  • Posts: 42
R&S SMIQ Schematics
« on: February 20, 2018, 10:07:06 pm »
Hello,

I'm searching for the schematics for a SMIQ06. Mainly for the summing loop and the IQ converter.

Thanks in advance
 

Offline DaJMasta

  • Super Contributor
  • ***
  • Posts: 2298
  • Country: us
    • medpants.com
Re: R&S SMIQ Schematics
« Reply #1 on: February 21, 2018, 01:10:33 am »
http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Rohde_Schwarz

There are also some threads around on working with the unit as well as a version of the 6GHz extension board schematic that's put back together so single schematic sheets are one PDF page.
 

Offline hscadeTopic starter

  • Contributor
  • Posts: 42
Re: R&S SMIQ Schematics
« Reply #2 on: February 21, 2018, 07:08:55 am »
Thanks but ko4bb has only the schematics for the 6GHz extension board but this is only used for frequencies above 3.3GHz.
 

Offline DaJMasta

  • Super Contributor
  • ***
  • Posts: 2298
  • Country: us
    • medpants.com
Re: R&S SMIQ Schematics
« Reply #3 on: February 21, 2018, 02:56:29 pm »
The SMIQ-XX service manuals contain schematics for all of the boards used in the SMIQ-06 (or 02, 03, 04) as well as the options, just use the table of contents at the beginning of the set to find which volume the one in question resides.
 

Offline hscadeTopic starter

  • Contributor
  • Posts: 42
Re: R&S SMIQ Schematics
« Reply #4 on: February 21, 2018, 05:53:33 pm »
Volume 1: Summing Loop

The entire volume 1 does not contain a schematic.
Sorry maybe I'm blind.
 
The following users thanked this post: charlyd


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf