Author Topic: WTB (US): Universal Programmer / PROM Programmer for Hitachi HD64F3048F  (Read 319 times)

0 Members and 1 Guest are viewing this topic.

Offline hiperco

  • Contributor
  • Posts: 12
  • Country: us
Looking for a Universal Programmer / PROM Programmer that supports Hitachi HD64F3048F uP (I am making my own DIP32 adapter).   TIA!
 

Offline coromonadalix

  • Frequent Contributor
  • **
  • Posts: 867
  • Country: ca
Re: WTB (US): Universal Programmer / PROM Programmer for Hitachi HD64F3048F
« Reply #1 on: February 13, 2018, 11:02:11 am »
hum   normally  you have the elnec  beehive, beeprog,  beeprog+ programmers, or the dataman 48pro2 ... Minato m1882 m1283, B&K 867c ... 

or an Xeltec SuperPro-6100


expensives to say the least

Don't understand you dip 32 adapter thing, the Hitachi is a 100 pins count ??
 

Offline hiperco

  • Contributor
  • Posts: 12
  • Country: us
Re: WTB (US): Universal Programmer / PROM Programmer for Hitachi HD64F3048F
« Reply #2 on: February 14, 2018, 04:39:47 am »
I'm trying to avoid paying both arms and both legs for a programmer + adapter ;)

The processor can be put in PROM mode, but requires a special adapter having a clock oscillator and reset circuit.  And some tweaks to the timing (for example, allow time for the processor to reset and stabilize).  The program/erase/verify specifications in PROM mode are the same as for the standard HN28F101 flash memory (DIP32).  I'm going to study my TL866 programmer (which claims to support NH28F101), maybe I'll get lucky and the power up/ down timing will be compatible.


"Factory" adapter is between $400 and $600:  https://www.dataman.com/dil32-qfp100-zif-hs3048eshf1h.html   :palm:

I've designed my own adapter board and sent it off to OSH Park :)
 



Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf