WTB: Fluke 8842A precision 10MEG divider network

[fixitanonymous354]

Hi,

I`m looking for 10Meg divider network for Fluke 8842A Z302 part#756130

I`m attaching a pic of the part.

Anyone willing to sell me the part from a donor 8842A ?

[coromonadalix]

hum  if you know the ohms values, you could make your own with precision thru holes resistors

Not much of brokens 8842a flying around ...

[Alex Nikitin]

You should be able to replace it (with a small change in the switching arrangement) with a standard precision decade resistor divider, for example the 1776-C681 from Caddock, available from stock at Mouser.

Cheers

Alex

[fixitanonymous354]

thanks ill look into it

Resistances are 9.9Meg (blown) and 100K (still good).

[TiN]

I bought USVD2 divider from Digikey recently for one of DMMs repair project, same values. Bit on pricey side though.