Author Topic: Any experience with Aoyue Int2702  (Read 4350 times)

0 Members and 1 Guest are viewing this topic.

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
Any experience with Aoyue Int2702
« on: July 25, 2011, 05:50:04 am »
Basically what i need to pay for a old model ZD - 915 desoldering gun locally i can buy this 3in1 station from abroad.

SO before i buy, any experiences with it?
Oh, the joy of sending various electronics to silicon heaven
 


Offline PsI-On

  • Contributor
  • Posts: 26
Re: Any experience with Aoyue Int2702
« Reply #2 on: July 25, 2011, 09:31:58 am »
I had one of these and the main transformer went on fire leaving me with no tools at all. The quality of these Chinese stations is not good, I would spend a little more and get separate tools that way you won't get caught out if one explodes!

-PsI
 

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
Re: Any experience with Aoyue Int2702
« Reply #3 on: July 25, 2011, 10:07:04 am »
I had one of these and the main transformer went on fire leaving me with no tools at all. The quality of these Chinese stations is not good, I would spend a little more and get separate tools that way you won't get caught out if one explodes!

-PsI

Well as expected. I have all tools except desoldering tool, i will have to dig deeper to find one then
Oh, the joy of sending various electronics to silicon heaven
 

Offline gregariz

  • Frequent Contributor
  • **
  • Posts: 545
  • Country: us
Re: Any experience with Aoyue Int2702
« Reply #4 on: July 25, 2011, 05:37:41 pm »
I had one of these and the main transformer went on fire leaving me with no tools at all. The quality of these Chinese stations is not good, I would spend a little more and get separate tools that way you won't get caught out if one explodes!

-PsI

Well as expected. I have all tools except desoldering tool, i will have to dig deeper to find one then

I too would prefer separate tools rather than these all-in-ones. Dave did a review of the Atten unit on one of his vids. I use a Sirocco hot air unit which I believe is made by Aoyue.. you can find them on ebay maybe.. just search for Sirocco hot air.... or I get mine locally at circuitspecialists

http://www.circuitspecialists.com/csi-6028.html

IMO these are the sorts of things I expect to throw in the bin every few years
 

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
Re: Any experience with Aoyue Int2702
« Reply #5 on: July 25, 2011, 06:15:20 pm »
Thats not the type of desoldering tool i was thinking about. Im in search for heated gun with suction.
Oh, the joy of sending various electronics to silicon heaven
 

Offline gregariz

  • Frequent Contributor
  • **
  • Posts: 545
  • Country: us
Re: Any experience with Aoyue Int2702
« Reply #6 on: July 25, 2011, 07:14:14 pm »
Thats not the type of desoldering tool i was thinking about. Im in search for heated gun with suction.

Not sure if its any good.. but the price is right...

http://www.circuitspecialists.com/csi474a.html
 

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
Re: Any experience with Aoyue Int2702
« Reply #7 on: July 25, 2011, 08:15:08 pm »
Thats not the type of desoldering tool i was thinking about. Im in search for heated gun with suction.

Not sure if its any good.. but the price is right...

http://www.circuitspecialists.com/csi474a.html

Looks nice, i could order one for review but its 110 VAC
Oh, the joy of sending various electronics to silicon heaven
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf