Author Topic: New Agilent 3000X firmware (Read 8331 times)

EEVblog · « **on:** October 18, 2011, 10:35:44 am »

Version 2.0 is now out:
http://www.home.agilent.com/agilent/editorial.jspx?cc=AU&lc=eng&ckey=2014548&nid=-35491.973678&id=2014548

They have added ARB capability to the function gen!
A video on it is rendering now.

Dave.

firewalker · « **Reply #1 on:** October 18, 2011, 10:37:52 am »

Free of charge?

Alexander.

mikeselectricstuff · « **Reply #2 on:** October 18, 2011, 11:09:00 am »

Quote from: firewalker on October 18, 2011, 10:37:52 am

Free of charge?

Alexander.

Presumably only if you have the FG license...

EEVblog · « **Reply #3 on:** October 18, 2011, 11:09:11 am »

Quote from: firewalker on October 18, 2011, 10:37:52 am

Free of charge?

Yup, ARB for no added cost, provided you have the WAVGEN option of course.

Dave.

hacklordsniper · « **Reply #4 on:** October 18, 2011, 11:18:03 am »

Thumbs up for the Agilent! I wondered why they did not implement it from start, possibly to protect their FG range. I wonder will my scope start to boot with this new firmware, cant wait to try it this evening.

mikeselectricstuff · « **Reply #5 on:** October 18, 2011, 11:23:23 am »

Looks like it's only on the 3000 though

hacklordsniper · « **Reply #6 on:** October 18, 2011, 04:32:08 pm »

Just updated!!!!

My boot problem is still present but the trial licenses are dead now! The scope does not allow to set the date any more back in past than 13.10.2011! Do not install this if you use trial licenses!!!

Rufus · « **Reply #7 on:** October 18, 2011, 05:59:21 pm »

Quote from: hacklordsniper on October 18, 2011, 04:32:08 pm

My boot problem is still present but the trial licenses are dead now!

Can you re-install previous firmware versions?

Mechatrommer · « **Reply #8 on:** October 18, 2011, 06:38:20 pm »

the fuzz of a new "software"

hacklordsniper · « **Reply #9 on:** October 18, 2011, 08:38:29 pm »

Quote from: Rufus on October 18, 2011, 05:59:21 pm

Quote from: hacklordsniper on October 18, 2011, 04:32:08 pm
My boot problem is still present but the trial licenses are dead now!

Can you re-install previous firmware versions?

Im not sure, can somebody share previous firmware?

Rufus · « **Reply #10 on:** October 18, 2011, 09:56:17 pm »

Quote from: hacklordsniper on October 18, 2011, 08:38:29 pm

Quote from: Rufus on October 18, 2011, 05:59:21 pm
Quote from: hacklordsniper on October 18, 2011, 04:32:08 pm
My boot problem is still present but the trial licenses are dead now!

Can you re-install previous firmware versions?

Try this http://www.freefilehosting.net/3000xseries01202011063000
Im not sure, can somebody share previous firmware?

mikeselectricstuff · « **Reply #11 on:** October 18, 2011, 09:57:28 pm »

What happens if the RTC is set to an old time when the FW is installed?

shadowless · « **Reply #12 on:** October 18, 2011, 11:11:33 pm »

Nothing new for the 2000x, wonder what change their mind on the ARB...is the 3000x not selling well?

EEVblog · « **Reply #13 on:** October 18, 2011, 11:19:07 pm »

Quote from: shadowless on October 18, 2011, 11:11:33 pm

Nothing new for the 2000x, wonder what change their mind on the ARB...is the 3000x not selling well?

Nope, when it was released they were caught by surprise how popular it was and had to ramp up the production rate.
In the blurb I have for the new firmware it says it is the fastest selling scope in Agilent's history, and that Agilent are growing at over 10% in the scope market compared to 3.5% for the rest of the industry.

I probably just all about marketing. They had the big scope release which was a huge success, and 7 months later they needed something new to wow the market with. It worked, I was excited enough about the arb release to do a video on it

Dave.

elCap · « **Reply #14 on:** October 19, 2011, 01:18:12 am »

Quote from: EEVblog on October 18, 2011, 11:19:07 pm

Quote from: shadowless on October 18, 2011, 11:11:33 pm
Nothing new for the 2000x, wonder what change their mind on the ARB...is the 3000x not selling well?

Nope, when it was released they were caught by surprise how popular it was and had to ramp up the production rate.
In the blurb I have for the new firmware it says it is the fastest selling scope in Agilent's history, and that Agilent are growing at over 10% in the scope market compared to 3.5% for the rest of the industry.

I probably just all about marketing. They had the big scope release which was a huge success, and 7 months later they needed something new to wow the market with. It worked, I was excited enough about the arb release to do a video on it

Dave.

With all the marketing actions Agilent are doing recently for the 3000x scope there must be something going on. (For instance why give them away if they are selling well?) Either they want to distinguish it more from the 2000x series, and/or it doesn't sell as much as they hoped. Too many customers are choosing the 2000x over it, and margins on 2000x are lower than 3000x. My amateur guess at least.

If I would have known so many new options and functions are constantly coming for the 3000x and nothing for 2000x, I would have bought a 3000x instead. So I'm a bit disappointed. Anyway, 2000x is still a great scope!!

hacklordsniper · « **Reply #15 on:** October 19, 2011, 04:23:57 am »

Quote from: mikeselectricstuff on October 18, 2011, 09:57:28 pm

What happens if the RTC is set to an old time when the FW is installed?

It does not care, it changes it to 13.10.2011.

As the comments for better improvments for 3000 series i guess its because there is a nice price difference, so customers should get more to justify it. Altrough if i could go back in past i would never, ever buy it.

swixo · « **Reply #16 on:** October 19, 2011, 05:19:17 am »

Quote from: hacklordsniper on October 19, 2011, 04:23:57 am

Altrough if i could go back in past i would never, ever buy it.

Would you go for the 3000 or sans-agilent?

s

hacklordsniper · « **Reply #17 on:** October 19, 2011, 05:52:09 am »

Quote from: swixo on October 19, 2011, 05:19:17 am

Quote from: hacklordsniper on October 19, 2011, 04:23:57 am
Altrough if i could go back in past i would never, ever buy it.

Would you go for the 3000 or sans-agilent?

s

I have the 3000, DSO-X3024 i would not buy an Agilent scope ever again

firewalker · « **Reply #18 on:** October 19, 2011, 05:29:12 pm »

Have anyone tried to reverse engineer the firmware and find a way to enable for free the extra features?

Alexander.

hacklordsniper · « **Reply #19 on:** October 19, 2011, 05:49:10 pm »

Quote from: firewalker on October 19, 2011, 05:29:12 pm

Have anyone tried to reverse engineer the firmware and find a way to enable for free the extra features?

Alexander.

There is some talk about it, but all hide it. All what i have tried did not work, so its simply out of my knowledge.

I spoken with few members which found the way but they do not want to share it.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: New Agilent 3000X firmware (Read 8331 times)

Share me