Author Topic: Good names for hammers... (Read 47011 times)

echen1024 · « **on:** November 17, 2013, 02:50:56 am »

Well, after the Widlerizer, I decided to find some more good names for hammers. My favorite so far is probably dr.diesel's "High Speed Linear Adjustment Device?"

Any more you guys can think of?

smashedProton · « **Reply #1 on:** November 17, 2013, 03:14:33 am »

Percussive maintenance instrument?

c4757p · « **Reply #2 on:** November 17, 2013, 03:19:04 am »

Quote from: smashedProton on November 17, 2013, 03:14:33 am

Percussive maintenance instrument?

On that note, "drum stick"?

SeanB · « **Reply #3 on:** November 17, 2013, 03:22:24 am »

Gentle Persuasion.

there is no limit as to how soft you can hit, but a definite upper limit.

nanofrog · « **Reply #4 on:** November 17, 2013, 03:23:49 am »

Any particular theme?

For example...
iSmash for Apple fans.
Mjölnir if you're a Thor fan.
"The Judge" has a rather permanent sense about it.
Maxwell's Silver Hammer (Beatles song, from Abbey Road album).

smashedProton · « **Reply #5 on:** November 17, 2013, 03:28:53 am »

Quote from: nanofrog on November 17, 2013, 03:23:49 am

Mjölnir if you're a Thor fan.

Since Asgard is so over the top... I really prefer antagonists who are low key.

Paul Moir · « **Reply #6 on:** November 17, 2013, 03:48:20 am »

In the construction business around here larger ones are referred to as "motivators".

Fsck · « **Reply #7 on:** November 17, 2013, 04:15:14 am »

Concussive Therapist

pickle9000 · « **Reply #8 on:** November 17, 2013, 04:17:32 am »

Hammeroid

echen1024 · « **Reply #9 on:** November 17, 2013, 04:22:20 am »

"motivators" sounds good...

SLJ · « **Reply #10 on:** November 17, 2013, 04:25:24 am »

I worked in a warranty service shop where they called it a "Sansui Alignment Tool".

Six_Shooter · « **Reply #11 on:** November 17, 2013, 04:28:21 am »

A friend of mine refers to hammers, especially anything greater than 2lb as "Swing presses">

notsob · « **Reply #12 on:** November 17, 2013, 04:53:24 am »

"knockometer"

rexxar · « **Reply #13 on:** November 17, 2013, 05:47:13 am »

Generally "fucking hammer" as in: "Where did I leave my fucking hammer?!"

Skimask · « **Reply #14 on:** November 17, 2013, 05:52:07 am »

Dufalator
or
BFH

aargee · « **Reply #15 on:** November 17, 2013, 07:48:41 am »

My Dad used to refer to the hammer as an "American Screwdriver", my US colleagues feel free to return the favour!

dexters_lab · « **Reply #16 on:** November 17, 2013, 07:51:27 am »

i do have a plain solid steel bar about 400mm long and 30mm diameter

Its called "the descision maker" if i see something i am trying to decide if i should keep or send something to landfill or recycling one swoop of the descision maker decides for me!

Neilm · « **Reply #17 on:** November 17, 2013, 11:08:04 am »

I refer to it as a fine adjustment device

G7PSK · « **Reply #18 on:** November 17, 2013, 11:18:25 am »

Universal adjuster tool. Equaliser.I have heard them referred to as an Irish screwdriver and A Scottish chisel, or Scottish spanner.

Zbig · « **Reply #19 on:** November 17, 2013, 01:39:20 pm »

Hammer HD

GreyWoolfe · « **Reply #20 on:** November 17, 2013, 01:46:12 pm »

Universal fitment device.

Tom, NW0LF

M. András · « **Reply #21 on:** November 17, 2013, 01:59:29 pm »

russian diy repair for things still under warranty. doenst work? here is it swing on it 2 times and it will be just as good as new

backflipper · « **Reply #22 on:** November 17, 2013, 02:17:57 pm »

My hammer's have always been called "heavy Harry" taken from my metal work teacher at college, Mr Neale (Sarge). He served for the Australian army as an engineer in the Vietnam war. He had some stories to tell.

c4757p · « **Reply #23 on:** November 17, 2013, 03:20:52 pm »

My favorite in this thread so far has to be Gentle Persuasion. That is a hilarious name for a hammer, and I think I will adopt it. My usual hammer nickname is BFH, which I also rather like, but I have definitely had more occasions for some Gentle Persuasion than for a BFH.

echen1024 · « **Reply #24 on:** November 17, 2013, 03:44:59 pm »

Exactly. Who was it that fixed a Keithley 2015 with a hammer?


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: Good names for hammers... (Read 47011 times)

Share me