Author Topic: New EEVblog Clean Room (Read 15111 times)

xrunner · « **Reply #1 on:** October 07, 2013, 01:01:46 am »

All that suit needs is a yellow color and you would remind people that remember of the rock group Devo.

c4757p · « **Reply #2 on:** October 07, 2013, 01:05:26 am »

I hoped I wasn't the only loser who thought that...

Lemme guess... one of these for Teardown Tuesday?

xrunner · « **Reply #3 on:** October 07, 2013, 01:08:42 am »

Quote from: c4757p on October 07, 2013, 01:05:26 am

I hoped I wasn't the only loser who thought that...

LOL. There's probably more losers here, if they dare to reveal themselves.

EEVblog · « **Reply #4 on:** October 07, 2013, 01:10:44 am »

Quote from: c4757p on October 07, 2013, 01:05:26 am

Lemme guess... one of these for Teardown Tuesday?

Energy Domes totally work dude!

Wytnucls · « **Reply #5 on:** October 07, 2013, 01:20:48 am »

Shoes in the lab? That's a no no!

free_electron · « **Reply #6 on:** October 07, 2013, 01:28:12 am »

Bwahahaaaaaa

I figured it would be too large . But at least you got it on right.
i spent 2 years hopping around in one of those ( mine was blue . white is for operators, blue is for repair guys. 1992-1993. ahh memories)

EEVblog · « **Reply #7 on:** October 07, 2013, 01:30:09 am »

Quote from: free_electron on October 07, 2013, 01:28:12 am

i figured it would be too large

Admit it, you did that on purpose to make me look like a dick!

free_electron · « **Reply #8 on:** October 07, 2013, 01:31:34 am »

hey, they are great coveralls for oddjobs: like painting, drywall work , plastering. stuff like that.

hemmikall · « **Reply #9 on:** October 07, 2013, 01:41:04 am »

Energy Domes work about as well as this device
buried underground in a small plastic tube not connected to anything and supposed to reduce electromagnetic fields in you house, note that some of the guys that sell you that device also disconnect some ground connections in your house wiring due to them causing electromagnetic fields

and this small device (about 15cm long) only costs around $550 USD

sleemanj · « **Reply #10 on:** October 07, 2013, 01:41:32 am »

Just need the orange pom poms.

Mr Smiley · « **Reply #11 on:** October 07, 2013, 01:49:24 am »

Which one's Dave

I see another competition

AlfBaz · « **Reply #12 on:** October 07, 2013, 01:49:42 am »

Quote from: sleemanj on October 07, 2013, 01:41:32 am

Just need the orange pom poms.

Did you get that picture from an atmel brochure?

xrunner · « **Reply #13 on:** October 07, 2013, 01:51:27 am »

Quote from: Mr Smiley on October 07, 2013, 01:49:24 am

Which one's Dave

I see another competition

That's the EEVBlog moderator team.

free_electron · « **Reply #14 on:** October 07, 2013, 01:58:01 am »

I wonder what class your 'cleanroom' is... Seeing there's carpet on the floor. y'a ain't gonna be doing submicron mate !

our submicron fab was a class 10 (us standard)... and that is very hard to achieve : only 100 particles per cubic meter allowed
the deep submicron fabs are still class 10 but the wafers travel in FOUP's (Front Opening Universal Pod). the wafers are only exposed to the clean air inside the FOUP and the inside of the processing reactors. inside the machines we have now below class 1 atmospheres.

http://en.wikipedia.org/wiki/Cleanroom
http://en.wikipedia.org/wiki/Cleanroom_suit
<-foup

other interesting stuff:

bronzies · « **Reply #15 on:** October 07, 2013, 02:07:33 am »

Haha are you serious? Where is the youtube video of these shenags?

staxquad · « **Reply #16 on:** October 07, 2013, 02:16:25 am »

Quote from: EEVblog on October 07, 2013, 01:30:09 am

Quote from: free_electron on October 07, 2013, 01:28:12 am
i figured it would be too large

Admit it, you did that on purpose to make me look like a dick!

a dick in a safe suit? (there's energy in Con Domes)

free_electron · « **Reply #17 on:** October 07, 2013, 02:34:46 am »

nownow children. let's not pollute this thread! it's supposed to be a cleanroom after all!

senso · « **Reply #18 on:** October 07, 2013, 02:51:21 am »

The yellow lights inside those fabs would drive me crazy

notsob · « **Reply #19 on:** October 07, 2013, 02:55:33 am »

Add long ears and a fluffy tail and save it for easter, Sagan will love it

pickle9000 · « **Reply #20 on:** October 07, 2013, 03:07:03 am »

Halloween is coming up.

Sar · « **Reply #21 on:** October 07, 2013, 03:51:03 am »

Quote from: free_electron on October 07, 2013, 01:58:01 am

the deep submicron fabs are still class 10 but the wafers travel in FOUP's (Front Opening Universal Pod). the wafers are only exposed to the clean air inside the FOUP and the inside of the processing reactors. inside the machines we have now below class 1 atmospheres.

Thanks for that video actually. I bought a bunch of similar containers surplus (though clear, and designed to sit on the basin of the container, I think they must have been TOUP(top opening) though). They're great for 3D printer filament but never knew what exactly they were used for. They had RFID and all sorts of weird attachments which I guess were for machines / arms to grab and move.

CrosseyeJack · « **Reply #22 on:** October 07, 2013, 04:52:02 am »

Dave is either upping the ante when it comes to his dumpster diving or planning to try and cook some meth in his lab ;-)

free_electron · « **Reply #23 on:** October 07, 2013, 05:50:40 am »

Quote from: senso on October 07, 2013, 02:51:21 am

The yellow lights inside those fabs would drive me crazy

The yellow lights are only in lithography. The rest of the fab is regular light. Its no different in a prinued circuit board fab. There too the lithography area is yellow lighted.
Photomask is light sensitive to ultraviolet .. Yellow is as far as is humanly possible away fromt that

Psi · « **Reply #24 on:** October 07, 2013, 05:52:16 am »

Add a few pens and a paperclip to the chest pocket, cut the hood off, put on some yellow gloves and slap a radiation sign on the back.

Great Scott!

Phaedrus · « **Reply #25 on:** October 07, 2013, 06:32:41 am »

Don't forget the bullet proof vest! Gotta keep an eye out for those Libyans...

XOIIO · « **Reply #26 on:** October 07, 2013, 08:57:36 am »

Quote from: sleemanj on October 07, 2013, 01:41:32 am

Just need the orange pom poms.

LOL, we need a petition to get dave to do a totally serious eevblog, with a pom pom on his head, as if it's not even there.

elCap · « **Reply #27 on:** October 07, 2013, 09:34:56 am »

Nice suit!
Working in a clean room is a part of my work. In the beginning it's hard to recognize your co-workers as the only thing you see are the eyes. But after a while there is no question who is who even if all has similar cloths. No need for name tags!
Then the yellow light.. that's ok until you start troubleshooting electronics.. color coded cables

.. all look either black, green or yellow.
Then there is the noise level, darkness, breathing problem with mask, constant sweating, lack of seats, and forget a quick visit to the restroom! - I need to change job!

GeorgeHahn · « **Reply #28 on:** October 07, 2013, 10:15:18 am »

Quote from: elCap on October 07, 2013, 09:34:56 am

Nice suit!
Working in a clean room is a part of my work. In the beginning it's hard to recognize your co-workers as the only thing you see are the eyes. But after a while there is no question who is who even if all has similar cloths. No need for name tags!
Then the yellow light.. that's ok until you start troubleshooting electronics.. color coded cables .. all look either black, green or yellow.
Then there is the noise level, darkness, breathing problem with mask, constant sweating, lack of seats, and forget a quick visit to the restroom! - I need to change job!

Never worked in a clean room before - why the yellow light?

SgtRock · « **Reply #29 on:** October 07, 2013, 10:23:50 am »

Greetings EEVBees:

--Reminiscent of Mr. Allen getting ready to hook up and go out the jump door as a giant spermatozoon in "Everything You Always Wanted to Know About Sex * But Were Afraid to Ask (1972)"
http://www.imdb.com/title/tt0068555/

"I'll have the Alfalfa sandwich, and the smashed yeast"
Woody Allen 1935 -

Best Regards
Clear Ether

Psi · « **Reply #30 on:** October 07, 2013, 10:29:59 am »

Quote from: GeorgeHahn on October 07, 2013, 10:15:18 am

why the yellow light?

Probably to limit exposing parts to the UV/blue end of the spectrum.
Pure red would be a bit uncomfortable, so yellow is the next best.

andtfoot · « **Reply #31 on:** October 07, 2013, 10:42:36 am »

Reminds me of when I was mucking around making fibreglass stuff for one of my motorbikes...

Call me paranoid, but the lack of itchiness afterwards made it worth it.

andtfoot · « **Reply #32 on:** October 07, 2013, 10:45:13 am »

Quote from: EEVblog on October 07, 2013, 12:58:15 am

The tied up sections below the knees also reminds me of this:

IZ3IJG · « **Reply #33 on:** October 07, 2013, 11:05:03 am »

@sleemanj they're yhe Oompa Loompa Team at work!

amyk · « **Reply #34 on:** October 07, 2013, 12:58:19 pm »

Quote from: elCap on October 07, 2013, 09:34:56 am

Then there is the noise level, darkness, breathing problem with mask, constant sweating, lack of seats, and forget a quick visit to the restroom!

One of those jobs where you wish you'd rather be operating a robot from outside...

geo_leeman · « **Reply #35 on:** October 07, 2013, 01:08:47 pm »

Add a radiation logo to the back and it's the beginnings of a Doc Brown Costume!

G7PSK · « **Reply #36 on:** October 07, 2013, 03:08:48 pm »

Is Dave joining Ghostbusters.

echen1024 · « **Reply #37 on:** October 07, 2013, 06:06:48 pm »

He needs a magnet in one hand, and a tinfoil hat, and when spinning my hand really fast, he will generate enough electricity for his lab.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: New EEVblog Clean Room (Read 15111 times)

Share me