Author Topic: New Member, Please introduce yourself  (Read 547910 times)

0 Members and 2 Guests are viewing this topic.

Offline desowin

  • Contributor
  • Posts: 21
Re: New Member, Please introduce yourself
« Reply #250 on: December 04, 2010, 05:33:33 am »
I'm 3rd year Computer Science student at The Silesian University of Technology.
 

Offline quanttrom

  • Regular Contributor
  • *
  • Posts: 51
Re: New Member, Please introduce yourself
« Reply #251 on: December 07, 2010, 03:49:55 pm »
hi,

I was born in Bulgaria but I spend almost half of my life in Canada, almost done my EE Bachelor and I am current considering Masters.
 

Offline Twellmann

  • Contributor
  • Posts: 7
Re: New Member, Please introduce yourself
« Reply #252 on: December 08, 2010, 10:14:10 am »
Hello all

I'm studying medical engineering at DTU, Copenhagen

Regards Daniel Twellmann
 

Offline paul30003

  • Contributor
  • Posts: 18
Re: New Member, Please introduce yourself
« Reply #253 on: December 09, 2010, 09:06:11 am »
Hi!

I'm Paul.

I don't work in any type of electronics, nor have I studied any area of electronics, I am 100% self educated from books and Internet.  I work as an engineer in the aerospace sector specialising in fuel system components.  I'm into lasers at the moment and my current project was my first experience of micro controllers.

I used Atmel's atmega328p with the arduino boot loader, this was ideal for the project, as several of the i/o pins where setup for PWM with a simple analogWrite command to control the speed of two motors.

Here is a link to the home of my project.

http://www.fxlasers.co.uk/

Here is a link to the part finished project in action. 



The project has come a long way since I took these photos, with an etched PCB, much improved Arduino sketch (fully commented) better optics.

I intend to fully publish photo's design schematics and the arduino sketch on the relevant part of this forum.

Thanks for reading, and I look forward to using this forum.



 

Offline AnnabelleR

  • Newbie
  • Posts: 3
Re: New Member, Please introduce yourself
« Reply #254 on: December 10, 2010, 10:42:21 pm »
Hello everyone,
My name is Muhammad Ali and i am a newbie here.I am 24 years old and doing masters in business administration and my major is Marketing.My interests are watching movies,online gaming,music,hanging out with friends and general discussions on different forums as you all know that forums are the best option for interacting and getting new and value able information.So i am here to get some information for myself...:)

Offline wenn32

  • Newbie
  • Posts: 1
Re: New Member, Please introduce yourself
« Reply #255 on: December 11, 2010, 05:14:24 am »
hello guys i am electronics newbie and i am glad to meet all the electronics gurus here
 

Offline Jendem

  • Newbie
  • Posts: 2
Re: New Member, Please introduce yourself
« Reply #256 on: December 11, 2010, 09:00:03 am »
Hi.
I'm from Molde in Norway. I love electronics  :)
I am student at Telemark University College,  Computer Science and Industrial Automation.
 

Offline ShaunLeeClarke

  • Contributor
  • Posts: 14
  • Country: au
  • Hi from Melbourne!
    • ELV Technology
Re: New Member, Please introduce yourself
« Reply #257 on: December 14, 2010, 11:14:41 pm »
What a long thread!

Well to add to it, I live in Melbourne, Australia and work as an IT/AV tech.

I've had an interest in electronics since a young age (I'm 24 now), but I'm certainly better at IT and AV!

I recently purchased an Arduino Uno and have started playing with electronics again.
Full time IT/AV tech from Melbourne VIC Australia. Newbie to electronics here to learn and maybe meet some friends :).
 

Offline moonspeedy

  • Newbie
  • Posts: 1
  • Country: ca
Re: New Member, Please introduce yourself
« Reply #258 on: December 17, 2010, 02:13:52 am »
Name's Aaron - love the site.  It's an inspiration to anyone interested in our world.  I'm into electronics design and art.
« Last Edit: November 06, 2013, 12:07:45 am by moonspeedy »
-AM2-
 

Offline guitar309

  • Contributor
  • Posts: 20
Re: New Member, Please introduce yourself
« Reply #259 on: December 17, 2010, 02:02:56 pm »
I'm Chris, I live in central Illinois and work as a telecommunications technician in a local union in my area... I work with a lot of low voltage items, (fire alarm,security,data cabling...)  I also LOVE electronics... I have been working on some guitar amp repair and a few other guitar related items...
 

Offline lgrfbs

  • Contributor
  • Posts: 28
  • Country: 00
    • My lab webserver
Re: New Member, Please introduce yourself
« Reply #260 on: December 19, 2010, 02:39:40 am »
Hello all!
I are from Sweden and have worked on electronics for modelrailroads systems from I was 12 years old.
My work is/was CNC operator, have writhed some program/script in Turbo Pascal, mikroPascal, Delphi, PHP, Perl, HTML, Qbasic for my house needs only.
homepages I really like is:
www.youtub.com - EEVblog :)
www.tyda.se - Swe/Eng synonym word
www.elektronikforumet.com Swedish Electronic forum

Program I like to use:
Paint.Net - Paint program
WinBoard - PCB
OpenOffice.org 3.2
Alibre Design - Mechanic CAD
Delphi 3 Pro - Make windows program
Raily 4 - Modelrailroad cad
NetDrive - Connect a FTP as a windows HDD.
mikroPascal PRO for PIC - make program for PIC
TrackMania Nations ESWC - Raceing game
TrackMania Nations Forever - Raceing game

Freeware or full licensed program is the way to go.
« Last Edit: December 19, 2010, 02:43:51 am by lgrfbs »
Err 404: The error is 404mm away from the screen.
Model railroading is high tech today!
 

Offline ml-eng

  • Contributor
  • Posts: 12
Re: New Member, Please introduce yourself
« Reply #261 on: December 19, 2010, 03:45:31 am »
Hi, this is Michael from Germany. I´m a engineer in soft- and hardware design (freelancer). I´m in professional engineering for 13years now. I do electronics since I was 10, thats about 30years ago.  So... Hello World.... ;D
 

Offline stan001

  • Contributor
  • Posts: 25
    • Arduino for Beginners
Re: New Member, Please introduce yourself
« Reply #262 on: December 19, 2010, 09:13:35 pm »
Hi, I am Stanley from Malaysia... I'm in the IT/Networking industry and recently discovered Arduino and electronic. I always wanted to learn about electronics since my teenage years but after I started playing with PCs and programming, this little passion of mine was put aside until now..August 2010.

Reading a lot of books about electronics, components, opamps, regulators, RC circuits and a lot more, most of the time , I probably had to read it a few time to understand what it means...

With the popularity of Arduino and Make magazine, I think electronic hobbyist is making a come back ...

Would like to learn more from the experienced electronic gurus here...

Found EEVblog when I was looking for a digital multimeter... got myself a Sanwa CD770 DMM after my mini analog multimeter movement coil stop working...

Stanley
 
 

Offline Mechatrommer

  • Super Contributor
  • ***
  • Posts: 8525
  • Country: my
  • reassessing directives...
Re: New Member, Please introduce yourself
« Reply #263 on: December 20, 2010, 03:09:06 am »
hi stanley, good evening. ;D
if something can select, how cant it be intelligent? if something is intelligent, how cant it exist?
 

Offline stan001

  • Contributor
  • Posts: 25
    • Arduino for Beginners
Re: New Member, Please introduce yourself
« Reply #264 on: December 20, 2010, 03:31:29 am »
Hey Shafri,

How are you ?

Glad to meet a fellow Malaysian on this forum....

Stanley
 

Offline MegaWatt

  • Contributor
  • Posts: 31
Re: New Member, Please introduce yourself
« Reply #265 on: December 20, 2010, 06:56:31 am »
Hello, I am MegaWatt
I study electrical engineering in Belgium!
Finally a forum of interest to me!
 

Offline Seán

  • Contributor
  • Posts: 23
Re: New Member, Please introduce yourself
« Reply #266 on: December 20, 2010, 08:44:28 am »
Hello,

My name is Seán.

I am 31, and a final year electronics student in Ireland.

Nice to meet you all.

Seán
 

Offline Mechatrommer

  • Super Contributor
  • ***
  • Posts: 8525
  • Country: my
  • reassessing directives...
Re: New Member, Please introduce yourself
« Reply #267 on: December 20, 2010, 01:44:19 pm »
Hey Shafri,
How are you ?
Glad to meet a fellow Malaysian on this forum....
Stanley
i'm ok. will be glad if you could locate ur'self (and other newcomers are welcomed too) in My Google Earth. Cheers ;)
if something can select, how cant it be intelligent? if something is intelligent, how cant it exist?
 

Offline Neb

  • Contributor
  • Posts: 7
Re: New Member, Please introduce yourself
« Reply #268 on: December 22, 2010, 12:58:16 pm »
Hello,

I'm a computer engineer, working as a junior hardware engineer.

I'm a hobbyist in electronics and make stuff for the heck of it because it interests me.  My on-going projects are a digital audio DSP and spdif mixer, a battery powered hygrometer, a loudspeaker amplifier, and the list goes on  :D.

Based on the eevblog, i picked up a Rigol scope about a year ago and, looking back, there is no way i could do my projects without it.  I figure it's about time i log on and check out what's going on here in the forums.

Edit: forgot to add - Hello from Canada!
 

Offline jedreg

  • Contributor
  • Posts: 11
Re: New Member, Please introduce yourself
« Reply #269 on: December 29, 2010, 03:22:57 am »
Hello everybody,
my name is andy - locally called 'jedrek' which stands for 'andy' (using suffix 'g' instead of 'k' to avoid taken nicks on forums); I live in Poland/EU working as software consultant traveling through central and eastern europe. My EE dusty/forgotten skills based on secondary edutation were not used for many years but recently I re-started this activity as hobby. I found this excellent forum as goldmine looking for detailed info on Rigol DSO which I am going to buy.

cheers,
-andy.

 

Offline kaos116

  • Newbie
  • Posts: 1
Re: New Member, Please introduce yourself
« Reply #270 on: December 30, 2010, 11:30:35 am »
Hello all - My name is Todd. I'm from Massachusetts in the United States. I work as an aircraft technician. I started playing around with electronics about 25 years ago. Today my main interest is with microcontrollers and 8 bit micro computers.

I found the forum through Youtube. Great work with great enthusiasm.

Todd
 

Offline rutri

  • Newbie
  • Posts: 3
Re: New Member, Please introduce yourself
« Reply #271 on: December 31, 2010, 02:10:09 am »
Hello,

    My name is Richard, I am a Computer Engineering Technologist and I design the control systems for locomotives. I am from Saskatchewan Canada, and have been watching this blog for over a year now.

regards,

Richard
« Last Edit: December 31, 2010, 02:13:48 am by rutri »
 

Offline Mindstorm88

  • Newbie
  • Posts: 4
Re: New Member, Please introduce yourself
« Reply #272 on: January 01, 2011, 04:04:06 am »
Hi Guys,
          I'm Bruno from Quebec, Canada , I'm an electrical expert in IREQ (electrical research institute), i do a lot of microcontroller stuff and as a hobby a specialist in electronic pinball repair !!!!
 

Offline vl400

  • Regular Contributor
  • *
  • Posts: 62
  • Country: au
    • Delcohacking.net
Re: New Member, Please introduce yourself
« Reply #273 on: January 01, 2011, 01:53:24 pm »
Hi everyone, I recetly purchased a Rigol scope and found this forum. Got lots of useful info from it so hope I can contribute some. I design hardware and write software for modifying vehicle engine management systems.
 

Offline jtv4k

  • Contributor
  • Posts: 5
Re: New Member, Please introduce yourself
« Reply #274 on: January 03, 2011, 01:03:18 pm »
Hey all,

I'm Justin from California (Orange County area). Graduated in Computer Engineering and working for a major hardware manufacturer.
Glad to be here!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf