Author Topic: Can't connect Fluke 289 via IR189USB  (Read 1833 times)

0 Members and 1 Guest are viewing this topic.

Offline apexxxTopic starter

  • Newbie
  • Posts: 1
  • Country: ru
Can't connect Fluke 289 via IR189USB
« on: January 11, 2019, 07:42:26 pm »
Hello! Can't connect Fluke 289 via IR189USB

I'm new, ran into a problem - decided to upgrade the firmware Fluke 289 from 1.12 to 1.16, bought a Fluke IR189USB cable, downloaded the firmware file, connected everything to a PC (7 Windows, sp 1, 64x), instal driver VCP 2.12.28 from www.ftdichip.com, but the program gives an error when trying to connect to a multimeter ( com port 2 connection failed), PC doesn't see a multimeter!

Can anyone help deal with this problem?
 

Offline nixxon

  • Frequent Contributor
  • **
  • Posts: 338
  • Country: no
Re: Can't connect Fluke 289 via IR189USB
« Reply #1 on: January 15, 2019, 05:10:30 pm »
Does the connector read "Rev. II" on the opposite side of the Fluke logo?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf