Author Topic: UK: Lighting for work area  (Read 2616 times)

0 Members and 1 Guest are viewing this topic.

Offline NivagSwerdnaTopic starter

  • Super Contributor
  • ***
  • Posts: 2495
  • Country: gb
UK: Lighting for work area
« on: March 20, 2018, 01:11:00 pm »
I have a small-ish room where we do family tinkering, board game playing etc with the illumination one rather sad 100W pendant lamp

With my aging eyes this just isn't bright enough

Any suggestions on something that doesn't look too industrial but would light the area?

Sorry for my ignorance on lighting!

TIA
 

Online Zero999

  • Super Contributor
  • ***
  • Posts: 19520
  • Country: gb
  • 0999
Re: UK: Lighting for work area
« Reply #1 on: March 20, 2018, 02:50:15 pm »
I have a small-ish room where we do family tinkering, board game playing etc with the illumination one rather sad 100W pendant lamp

With my aging eyes this just isn't bright enough

Any suggestions on something that doesn't look too industrial but would light the area?

Sorry for my ignorance on lighting!

TIA
Just replace the bulb with a 32W CFL. I got one from a friend who was replace them all with cool white LEDs and installed it in an elderly neighbour's (she's almost blind) house and she finds it much easier to see.
 
The following users thanked this post: NivagSwerdna

Offline grifftech

  • Frequent Contributor
  • **
  • Posts: 369
  • Country: us
    • youtube channel
Re: UK: Lighting for work area
« Reply #2 on: March 21, 2018, 02:54:47 pm »
just install a window :D
 
The following users thanked this post: NivagSwerdna

Offline NivagSwerdnaTopic starter

  • Super Contributor
  • ***
  • Posts: 2495
  • Country: gb
Re: UK: Lighting for work area
« Reply #3 on: March 21, 2018, 03:16:46 pm »
I've been looking at "600x1200mm LED Panel" which are 60W   Lumens: 4,800
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12298
  • Country: au
Re: UK: Lighting for work area
« Reply #4 on: March 21, 2018, 03:17:54 pm »
just install a window :D

That works better at night if you have a street light right outside.  Ask your council.
 
The following users thanked this post: NivagSwerdna

Offline CopperCone

  • Super Contributor
  • ***
  • Posts: 1415
  • Country: us
  • *knock knock*
Re: UK: Lighting for work area
« Reply #5 on: March 21, 2018, 03:52:51 pm »
having the managers maintain lighting with tiki torches will maintain a heart healthy work force while also promoting a relaxed atmosphere.
 

Offline NivagSwerdnaTopic starter

  • Super Contributor
  • ***
  • Posts: 2495
  • Country: gb
Re: UK: Lighting for work area
« Reply #6 on: March 21, 2018, 04:06:34 pm »
having the managers maintain lighting with tiki torches will maintain a heart healthy work force while also promoting a relaxed atmosphere.
This is for home so not so many managers in the tiki tiki tiki room.  :)
 

Offline Kjelt

  • Super Contributor
  • ***
  • Posts: 6460
  • Country: nl
Re: UK: Lighting for work area
« Reply #7 on: March 21, 2018, 05:22:20 pm »
Get a 3000K dimmable led light downlighter about 30W should suffice.
 

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 16283
  • Country: za
Re: UK: Lighting for work area
« Reply #8 on: March 21, 2018, 06:52:32 pm »
LED fluorescent fitting, one which takes 2 1.2m LED tubes is both cheap, insane light output and cool running.  If you have a false ceiling then a drop in panel LED fixture in the ceiling will work as well, providing a lot of light in a very unobtrusive manner.
 

Offline Harb

  • Regular Contributor
  • *
  • Posts: 244
  • Country: au
Re: UK: Lighting for work area
« Reply #9 on: March 23, 2018, 04:22:48 am »
The room needs to be painted white on all walls and ceiling to be well lit........its amazing what 100w will do in a white room.
 

Offline BravoV

  • Super Contributor
  • ***
  • Posts: 7547
  • Country: 00
  • +++ ATH1
Re: UK: Lighting for work area
« Reply #10 on: March 23, 2018, 05:20:56 am »
Get a high CRI led bulb, quite pricey though, but worth it especially really close to true sun light quality.

-> https://store.yujiintl.com/collections/high-cri-led-lights/products/bc-series-a60-high-cri-remote-phosphor-led-bulb-unit-2-pcs

Offline MosherIV

  • Super Contributor
  • ***
  • Posts: 1530
  • Country: gb
Re: UK: Lighting for work area
« Reply #11 on: March 23, 2018, 07:58:05 am »
Hi

The type  (colour) of light makes a huge difference. A 'daylight light' bulb looks brighter than a normal 'warm' light bulb even though they are the same power rating. For daylight bulbs look for colour temperatre 65K, warm white is normally 32K.

Also, a magnifying inspection lamp may help, I got one of these when they were £25 back a few years ago
https://www.maplin.co.uk/p/22w-fluorescent-magnifying-craft-lamp-a29ff

 

Offline paulca

  • Super Contributor
  • ***
  • Posts: 4048
  • Country: gb
Re: UK: Lighting for work area
« Reply #12 on: March 23, 2018, 08:05:24 am »
The type  (colour) of light makes a huge difference. A 'daylight light' bulb looks brighter than a normal 'warm' light bulb even though they are the same power rating. For daylight bulbs look for colour temperatre 65K, warm white is normally 32K.

Also, a magnifying inspection lamp may help, I got one of these when they were £25 back a few years ago
https://www.maplin.co.uk/p/22w-fluorescent-magnifying-craft-lamp-a29ff

I bought "daylight" LEDs for my work space/study/lab and kitchen.  They are bright yes, but they are also harsh, cold, uninviting.  Probably not so bad for a workbench light, but I am regretting the choice in the kitchen.

+1 for the magnifier lamp, I bought a "manicure light".  The only thing I would suggest is to look for and buy an LED one, retro fitting LEDs to a CFL one later is a faff.
"What could possibly go wrong?"
Current Open Projects:  STM32F411RE+ESP32+TFT for home IoT (NoT) projects.  Child's advent xmas countdown toy.  Digital audio routing board.
 

Offline Kjelt

  • Super Contributor
  • ***
  • Posts: 6460
  • Country: nl
Re: UK: Lighting for work area
« Reply #13 on: March 23, 2018, 08:25:31 am »
A daylight lamp is for
- color rendering, not something you need at home
- video recording, not something you need at home
- plant growth, not something you really need at home.

For the rest:

Kitchen 2700K
Livingroom 3000K
Workplace/desk/garage 4000K
 

Offline frozenfrogz

  • Frequent Contributor
  • **
  • Posts: 936
  • Country: de
  • Having fun with Arduino and Raspberry Pi
Re: UK: Lighting for work area
« Reply #14 on: March 23, 2018, 08:32:57 am »
Care to share a plan view of the room?
In a casual room I usually tend to like a combination of indirect lighting for the overall brightness and a dedicated spot or area light for the main point of interest. It all depends on what’s going to be going on in the room though :)
He’s like a trained ape. Without the training.
 

Online tggzzz

  • Super Contributor
  • ***
  • Posts: 19497
  • Country: gb
  • Numbers, not adjectives
    • Having fun doing more, with less
Re: UK: Lighting for work area
« Reply #15 on: March 23, 2018, 11:39:08 am »
My experience is that I want a lot of light over a small area in precisely the direction I need, and not into my eyes. Naturally the area and direction changes every 5 minutes.

The best I've found was an Ikea LED light on a long gooseneck, but they seem to have stopped selling it :( The nearest appears to be their £12 Jarnso (or similar) which has a short gooseneck. I'll probably get one to use its power supply with my existing light, due to PSU failure.
« Last Edit: March 23, 2018, 01:54:44 pm by tggzzz »
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
 

Offline Edison

  • Frequent Contributor
  • **
  • Posts: 263
  • Country: cz
Re: UK: Lighting for work area
« Reply #16 on: March 23, 2018, 01:35:56 pm »
Inspire yourself - my workplace

Main lighting - industrial LED strip 24V 2700lm 14W / m 4000K 1x 1,5m 1x 1m.
illuminated magnifier 8W 3500K.
dichroic halogen reflector 70W 2800K.
point chip CREE 3W 6000K.
2x Ikea Janso V1431 1.5W - Proxon Milling Machine.
3,5W LED chip with optics 3500K - soldering position - in extraction hose.
« Last Edit: March 23, 2018, 01:38:25 pm by Edison »
Everything works as the weakest link in the chain
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf