Weller flat tip for drag soldering SMD

[tunes]

I have a WES 51 station

WHat is the part number and size flat tip needed for drag soldering SMD?

[EEVblog]

You can do it with any top really. Larger sizes might be better though.
What is your current tip?, and have you tried it?

Dave.

[KJ6EAD]

The WES51 uses the PES51 pencil which uses the ET series tips.

http://www.cooperhandtools.com/brands/weller/index.cfm?model_list=1&att_id=WEL007%20%20%20%20%20%20%20%20%20%20%20%20&att1=Tips%20and%20Nozzles%20%20%20%20%20%20%20%20%20%20%20%20%20%20&att2=ET%20Series%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20

If you don't mind sloppy work, use lots of flux and have a lot of soldering experience, any ordinary screwdriver tip will work. If you want better results with less effort, try to get some tips that match the work. A bent conical (Weller doesn't offer one) for chip components and bevel (single flat) for gull wing leads are a good start. Plato makes a reservoir tip for SMD that fits (EW-0574).

http://www.techspray.com/download-tds-document.php?pId=129