Author Topic: µCurrent GOLD on Kickstarter  (Read 224346 times)

0 Members and 3 Guests are viewing this topic.

Offline TheWelly888

  • Frequent Contributor
  • **
  • Posts: 344
  • Country: gb
Re: µCurrent GOLD on Kickstarter
« Reply #475 on: April 22, 2014, 05:05:52 pm »
Mine serial number 1013 was waiting for me when I got home from work today.  :-+ Will test it soon.
You can do anything with the right attitude and a hammer.
 

Offline Fab6657

  • Contributor
  • Posts: 26
  • Country: fr
Re: µCurrent GOLD on Kickstarter
« Reply #476 on: April 22, 2014, 05:15:24 pm »
Hello All's

mine with serial 1324 was sended the 11 April from Australia and arrived today
at home in France the 22 April. No external damage, testing soon.

Kind regards,

Fabrice
« Last Edit: April 22, 2014, 05:17:17 pm by Fab6657 »
 

Offline elgonzo

  • Supporter
  • ****
  • Posts: 688
  • Country: 00
Re: µCurrent GOLD on Kickstarter
« Reply #477 on: April 23, 2014, 05:22:46 pm »
#1006 received today, yay!  8)
Visually everything is okay, but not turned on yet (i still need to buy a battery, doh!)
 

Offline Christe4nM

  • Supporter
  • ****
  • Posts: 252
  • Country: nl
Re: µCurrent GOLD on Kickstarter
« Reply #478 on: April 23, 2014, 05:53:49 pm »
#1027 arrived the 22nd of April. Was send the 14th.
Just tested the mA range which works perfectly 8)
 

Offline haoleboy

  • Supporter
  • ****
  • Posts: 15
  • Country: us
Re: µCurrent GOLD on Kickstarter
« Reply #479 on: April 23, 2014, 08:39:27 pm »
My all-red binding post #311 arrived on the 15th, shipped on the 8th.  I'm new to electronics, but it seems to work perfectly.  Thank you Dave!
 

Offline electr_peter

  • Supporter
  • ****
  • Posts: 1300
  • Country: lt
Re: µCurrent GOLD on Kickstarter
« Reply #480 on: April 25, 2014, 06:59:32 pm »
µCurrent Gold with SN #1003 arrived on 2014-04-25 (send date 2014-04-14). Quality is very good, no issues with insuficient solder wetting or tomb stoning.

It works well - see picture with test of crude CC load.
« Last Edit: April 26, 2014, 07:44:23 pm by electr_peter »
 

Offline tuo

  • Contributor
  • Posts: 17
  • Country: de
Re: µCurrent GOLD on Kickstarter
« Reply #481 on: April 26, 2014, 10:21:32 am »
Mine (#001259) was in my mail box today morning here in Luebeck, Germany. It had a note saying that it was freed from customs.

I haven't got a battery for it, so it's not yet possible to test it, but I did a visual inspection and everything is looking good.
 

Offline u271D

  • Contributor
  • Posts: 41
  • Country: ua
Re: µCurrent GOLD on Kickstarter
« Reply #482 on: April 26, 2014, 10:39:31 am »
does anyone know if this thing comes with a warranty?  I've emailed & PM Dave after he said to email him and I've gotten no response!  |O
 

Online EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 37661
  • Country: au
    • EEVblog
Re: µCurrent GOLD on Kickstarter
« Reply #483 on: April 26, 2014, 11:07:19 am »
I switch to uA range and my DMM to V (not mV range) and got a reading of .9995   My source is 1.0003mA so:
1.0003mA (+/-)0.05% = uCurrent output of 0.9998V - 1.0008V
Then you add in the meter (+/-)0.05%+5 count you get a range of:
0.9988V - 1.0018V. So if my math is right; in the uA range I am getting a reading within the limits of the uCurrant and my Agilent U1272A DMM. It is just not working right in the mA range.

If uA range work and the mA range doesn't then it can only be the switch or the mA shunt resistor, there is nothing else. Check the connections on those, something has to be wrong somewhere.
I'll be shipping you another one anyway.
 

Offline u271D

  • Contributor
  • Posts: 41
  • Country: ua
Re: µCurrent GOLD on Kickstarter
« Reply #484 on: April 27, 2014, 07:01:41 pm »
how would I go about testing those two parts?
 

Offline jonwhite

  • Contributor
  • Posts: 10
Re: µCurrent GOLD on Kickstarter
« Reply #485 on: April 30, 2014, 02:01:47 pm »
hi
just wondering if dave has a stash of these for sale? or when is the next batch available?
thank you
 

Offline elgonzo

  • Supporter
  • ****
  • Posts: 688
  • Country: 00
Re: µCurrent GOLD on Kickstarter
« Reply #486 on: April 30, 2014, 04:26:20 pm »
...It had a note saying that it was freed from customs....

Yupp, thanks to Dave for being so clever to declare a value of only $25. Even if German customs would falsely calculate with US$ instead of AUS$, this would only translate to roughly EUR 18. In Germany, any imported goods with a value of up to EUR 22 (incl. shipping costs) is exempted from custom fees and from import sales tax. I guess many other (European) countries have similar exemptions.

 

Offline electr_peter

  • Supporter
  • ****
  • Posts: 1300
  • Country: lt
Re: µCurrent GOLD on Kickstarter
« Reply #487 on: April 30, 2014, 08:15:30 pm »
[...]In Germany, any imported goods with a value of up to EUR 22 (incl. shipping costs) is exempted from custom fees and from import sales tax. I guess many other (European) countries have similar exemptions.
In Lithuania (and I suspect in most EU countries), for example, you have to pay VAT (21% in Lithuania) if parcel value is higher than ~22 EUR (30 USD). Custom fee is calculated for product of value ~46 EUR (64 USD) or higher.
Fees are on the high side in my opinion, but the main problem is that any shipping adds to total value base for these taxes. This may lead to situations where shipping and taxes are >100% of original price of the item.

EDIT: Custom duties are applied only to import form non EU counties. VAT applies for goods from EU and non EU.
« Last Edit: May 01, 2014, 07:16:56 am by electr_peter »
 

Online EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 37661
  • Country: au
    • EEVblog
Re: µCurrent GOLD on Kickstarter
« Reply #488 on: May 01, 2014, 07:41:26 am »
just wondering if dave has a stash of these for sale? or when is the next batch available?
thank you

More were supposed to turn up today (they haven't), and more tomorrow. So that should finally fulfill the kickstarter orders and I will have spares for general sale.
I do still need to set up a shopping cart that integrates with my eParcel system though.
 

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 16272
  • Country: za
Re: µCurrent GOLD on Kickstarter
« Reply #489 on: May 03, 2014, 04:39:45 pm »
Well, no 001345 arrived here finally in ZA. Sent 4/4/14, so it was all SAPO being efficient as usual.

Looked and out of CR2032 cells at home, so will get one Monday. Had one CR2025 which does fit, and the low voltage detection does work, as the cell ( NIB) expired 6/2009.
 

Offline jonwhite

  • Contributor
  • Posts: 10
Re: µCurrent GOLD on Kickstarter
« Reply #490 on: May 04, 2014, 10:30:22 pm »


More were supposed to turn up today (they haven't), and more tomorrow. So that should finally fulfill the kickstarter orders and I will have spares for general sale.
I do still need to set up a shopping cart that integrates with my eParcel system though.
[/quote]

can i have one please, please............how much are they and how can i order one
thank you
 

Offline linux-works

  • Super Contributor
  • ***
  • Posts: 1993
  • Country: us
    • netstuff
Re: µCurrent GOLD on Kickstarter
« Reply #491 on: May 05, 2014, 12:00:13 am »
I missed the kickstarter deal; so if there are spares, I'd love to buy one.

Offline rjk5378

  • Contributor
  • Posts: 32
  • Country: us
  • "Life is a science fair!" - Forrest Mims
    • Law Offices of Robert J. Keller, P.C.
Re: µCurrent GOLD on Kickstarter
« Reply #492 on: May 05, 2014, 05:08:59 am »
Mine arrived safe and sound in Maryland USA just about 10 days ago. Will probably unload my original version at a hamfest or on eBay (which is where I got it in the first place <g>).
- Bob, KY3R
 

Offline wilheldp

  • Regular Contributor
  • *
  • Posts: 223
  • Country: us
Re: µCurrent GOLD on Kickstarter
« Reply #493 on: May 05, 2014, 11:45:56 pm »
Please add me on the list for one of the spares. TY

Dave sold the previous version on Adafruit, so I'm pretty sure that his additional stock will be available through retail outlets like that.  You don't need to beg.
 

Offline gdewitte

  • Supporter
  • ****
  • Posts: 59
  • Country: us
Re: µCurrent GOLD on Kickstarter
« Reply #494 on: May 06, 2014, 12:58:32 am »
I think they're in here someplace, but so far my searches have not turned them up. What (and where) are the details for the current sources Dave built to test µCurrent GOLDs?
 

Offline jonwhite

  • Contributor
  • Posts: 10
Re: Cuµrrent GOLD on Kickstarter
« Reply #495 on: May 06, 2014, 09:16:18 am »
i see micro current boards on daves desk behind that 2 channel scope can i have one please?
 

Offline starblue

  • Newbie
  • Posts: 8
  • Country: de
Re: µCurrent GOLD on Kickstarter
« Reply #496 on: May 11, 2014, 07:02:03 pm »
Mine arrived last week here in Germany, found it in the post box Friday night.

I did some tests today, a function generator in series with a 100k resistor on the nA setting.
Response is flat to 200kHz, 3dB down at about 280kHz. In the time domain there is a little bit of overshot.
See attached pictures.
Visit Chaospott, hacker space in Essen, Germany http://chaospott.de
 

Offline Valen

  • Newbie
  • Posts: 6
  • Country: nl
Re: µCurrent GOLD on Kickstarter
« Reply #497 on: May 13, 2014, 01:54:26 pm »
Sn# 1440 has just arrived in the Netherlands. The Australian customs sticker says it was manually singed by an Acceptance Officer on 6/5/2014. So it only took a week to cross the world I guess.

Luckily I had a spare CR2032 laying around. BATT OK was a 'golden Go'. Haven't used or tested it any further though.

Dave, thumbs up mate.
 

Offline DarkStar

  • Contributor
  • Posts: 20
  • Country: us
    • KU7PDX: Amateur Radio Station
Re: µCurrent GOLD on Kickstarter
« Reply #498 on: May 13, 2014, 05:00:01 pm »
I guess I should mention that I received #450 in great shape (about a week after shipping). Popped a battery in and everything seems to be functioning properly!
--Chris ^_^
 

Offline u271D

  • Contributor
  • Posts: 41
  • Country: ua
Re: µCurrent GOLD on Kickstarter
« Reply #499 on: May 14, 2014, 03:31:42 am »
on the 10th I got my replacement unit #826. After fixing the battery holder, all seams to be good.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf