Author Topic: Opening file and exporting PDF (or gerber)  (Read 3505 times)

0 Members and 1 Guest are viewing this topic.

Offline Cloud

  • Regular Contributor
  • *
  • Posts: 156
  • Country: si
Opening file and exporting PDF (or gerber)
« on: March 12, 2016, 07:45:38 am »
Hello,
I have found this nice project for reflow controller, but the problem is, that files are in DIP trace format and since I am not using dip trace, I would like to ask some one to open them and export the PDF or gerber. I would need files for TOP copper, BOTTOM copper and solder mask layer (and if its possible BOM).

Files are here: https://github.com/rocketscream/Reflow-Oven-Controller

Thank you very much
« Last Edit: March 12, 2016, 08:25:58 am by Cloud »
 

Offline HwAoRrDk

  • Frequent Contributor
  • **
  • Posts: 547
  • Country: gb
Re: Opening file and exporting PDF (or gerber)
« Reply #1 on: March 13, 2016, 01:38:45 pm »
Here you go, see attached. I exported Gerbers for everything, including silk screen, etc. Let me know if you need anything else (i.e. paste layers). BOM is in CSV format.
 

Offline Cloud

  • Regular Contributor
  • *
  • Posts: 156
  • Country: si
Re: Opening file and exporting PDF (or gerber)
« Reply #2 on: March 14, 2016, 04:04:14 am »
Thank you very much  :-+
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf