Author Topic: Opening file and exporting PDF (or gerber)  (Read 5601 times)

0 Members and 1 Guest are viewing this topic.

Offline CloudTopic starter

  • Regular Contributor
  • *
  • Posts: 194
  • Country: si
Opening file and exporting PDF (or gerber)
« on: March 11, 2016, 08:45:38 pm »
Hello,
I have found this nice project for reflow controller, but the problem is, that files are in DIP trace format and since I am not using dip trace, I would like to ask some one to open them and export the PDF or gerber. I would need files for TOP copper, BOTTOM copper and solder mask layer (and if its possible BOM).

Files are here: https://github.com/rocketscream/Reflow-Oven-Controller

Thank you very much
« Last Edit: March 11, 2016, 09:25:58 pm by Cloud »
 

Offline HwAoRrDk

  • Super Contributor
  • ***
  • Posts: 1456
  • Country: gb
Re: Opening file and exporting PDF (or gerber)
« Reply #1 on: March 13, 2016, 02:38:45 am »
Here you go, see attached. I exported Gerbers for everything, including silk screen, etc. Let me know if you need anything else (i.e. paste layers). BOM is in CSV format.
 

Offline CloudTopic starter

  • Regular Contributor
  • *
  • Posts: 194
  • Country: si
Re: Opening file and exporting PDF (or gerber)
« Reply #2 on: March 13, 2016, 05:04:14 pm »
Thank you very much  :-+
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf