Author Topic: Adding Library's to Eagle  (Read 3234 times)

0 Members and 1 Guest are viewing this topic.

Offline KarlosVandangoTopic starter

  • Contributor
  • Posts: 19
  • Country: gb
Adding Library's to Eagle
« on: March 15, 2014, 07:50:48 pm »
Hello,

Just started back into electronics after a long break, and so want to start with a little project using Eagle. I found that on farnell/element 14 you can actually download the symbol library into Eagle... Tried to follow their instructions but gave up... Anybody else have a straight forward method?

Thanks...

Karl

Oh, it was using the MC34063.... dc/dc convertor...
I'm just making this up as I go along!
 

Offline Prime73

  • Regular Contributor
  • *
  • Posts: 174
  • Country: ca
Re: Adding Library's to Eagle
« Reply #1 on: March 15, 2014, 07:55:34 pm »
go to Options -> Directories

and specify a full path to your libraries folder. you have multiple forcers separated by a colon symbol ( : )

restart Eagle
 

Offline KarlosVandangoTopic starter

  • Contributor
  • Posts: 19
  • Country: gb
Re: Adding Library's to Eagle
« Reply #2 on: March 15, 2014, 10:19:58 pm »
Brilliant! Thanks for that.... :)

Regards,

Karl
I'm just making this up as I go along!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf