Low Cost PCB's Low Cost Components

Author Topic: Eagle PCB for 4-layers add 2; 3Layers _Restrict for internal two layers.  (Read 1149 times)

0 Members and 1 Guest are viewing this topic.

Offline Jefferson

  • Contributor
  • Posts: 27
  • Country: us
Hi All!
There is a need in Eagle PCB for 4-layers add 2; 3Layers _Restrict for internal two layers.
That does not exist for the installation.

Create a new layer and name 2Layers _Restrict not a problem,
but as he screwed function _Restrict, ... can anyone know?

Thanks.
 

Offline jgarc063

  • Regular Contributor
  • *
  • Posts: 74
  • Country: us
Re: Eagle PCB for 4-layers add 2; 3Layers _Restrict for internal two layers.
« Reply #1 on: November 22, 2016, 04:06:07 AM »
Hello Jefferson,

I hope you're doing well. There are currently now restrict layers available for the inner layers. Naming a layer with the word restrict in it, won't do anything.

The best that you can do at the moment is draw a cutout polygon on the inner layers to not fill part of a polygon. This is pretty easy to do, just draw a polygon and then look at it's properties set the fill type to cutout.

Let me know if there's anything else I can do for you or if I have misunderstood the question.

Best Regards,
Jorge Garcia
 

Offline Jefferson

  • Contributor
  • Posts: 27
  • Country: us
Re: Eagle PCB for 4-layers add 2; 3Layers _Restrict for internal two layers.
« Reply #2 on: November 22, 2016, 09:48:25 PM »
Jorge thanks for the answer. You understand me perfectly and accurately answered.
It works.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf